It was possible for a module that registered for transport monitor
events to pass in a pjsip_transport that had already been freed.
This caused pjsip_transport_events to crash when looking up the
monitor for the transport. The fix is a two pronged approach.
1. We now increment the reference count on pjsip_transports when we
create monitors for them, then decrement the count when the
transport is going to be destroyed.
2. There are now APIs to register and unregister monitor callbacks
by "transport key" which is a string concatenation of the remote ip
address and port. This way the module needing to monitor the
transport doesn't have to hold on to the transport object itself to
unregister. It just has to save the transport_key.
* Added the pjsip_transport reference increment and decrement.
* Changed the internal transport monitor container key from the
transport->obj_name (which may not be unique anyway) to the
transport_key.
* Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that
fills a buffer with the transport_key using a passed-in
pjsip_transport.
* Added the following functions:
ast_sip_transport_monitor_register_key
ast_sip_transport_monitor_register_replace_key
ast_sip_transport_monitor_unregister_key
and marked their non-key counterparts as deprecated.
* Updated res_pjsip_pubsub and res_pjsip_outbound_register to use
the new "key" monitor functions.
NOTE: res_pjsip_registrar also uses the transport monitor
functionality but doesn't have a persistent object other than
contact to store a transport key. At this time, it continues to
use the non-key monitor functions.
ASTERISK-30244
Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b
Add live_dangerously flag to manager and use this flag to
determine if a configuation file outside of AST_CONFIG_DIR
should be read.
ASTERISK-30176
Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404
When decoding q.931 encoded calling/called number
now checking for length being less than minimum required.
ASTERISK-30103
Change-Id: I3dcfce0f35eca258dc450f87c92d4d7af402c2e7
If geolocation is not in use for an endpoint, the NOTICE
log level is currently spammed with messages about this,
even though nothing is wrong and these messages provide
no real value. These log messages are therefore changed
to debugs.
ASTERISK-30241 #close
Change-Id: I656b355d812f67cc0f0fdf09b00b0e1458598bb4
(cherry picked from commit 8afb313a43)
Adding user=phone to local-side uri's when user_eq_phone=yes is set for
an endpoint. Previously this would only add the header to the To and R-URI.
ASTERISK-30178
Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600
Fixed a segfault caused by var_list_from_loc_info() encountering
an empty location info element.
Fixed an issue in ast_strsep() where a value with only whitespace
wasn't being preserved.
Fixed an issue in ast_variable_list_from_quoted_string() where
an empty value was considered a failure.
ASTERISK-30215
Reported by: Dan Cropp
Change-Id: Ieca64e061a6d9298f0196c694b60d986ef82613a
This change adds an option, answeredonly, that will prevent music on
hold on channels that are not answered.
ASTERISK-30135
Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08
This change allows TEL URI requests to come through for basic calls. The
allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To
headers will now allow TEL URIs, as well as the request URI.
Support is only for TEL URIs present in traffic from a remote party.
Asterisk does not generate any TEL URIs on its own.
ASTERISK-26894
Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a
We're validating the following functionality:
encrypting a block of data with RSA
decrypting a block of data with RSA
signing a block of data with RSA
verifying a signature with RSA
encrypting a block of data with AES-ECB
encrypting a block of data with AES-ECB
as well as accessing test keys from the keystore.
ASTERISK-30045 #close
Change-Id: I0d10e7b41009c5290a4356c6480e636712d5c96d
The FRAME_TRACE function currently asserts if it sees
a MASQUERADE_NOTIFY. However, this is a legitimate thing
that can happen so asserting is inappropriate, as there
are no clear negative ramifications of such a thing. This
is adjusted to be like the other frames to print out
the subclass.
ASTERISK-30210 #close
Change-Id: I8ecbdcf17e35f64bdeab42868471f581ad1d1a56
Adds an AMI event to indicate that a deadlock
has likely started, when Asterisk is compiled
with DETECT_DEADLOCKS enabled. This can make
it easier to perform automated deadlock detection
and take appropriate action (such as doing a core
dump). Unlike the deadlock warnings, the AMI event
is emitted only once per deadlock.
ASTERISK-30161 #close
Change-Id: Ifc6ed3e390f8b4cff7f8077a50e4d7a5b54e42fb
Adds the end_marked_any option, which can be used
to kick a user from a conference if any marked user
leaves.
ASTERISK-30211 #close
Change-Id: I9e8da7ccb892e522546c0f2b5476d172e022c2f5
Use const char for char arguments to
pbx_substitute_variables_helper_full_location
that can do so (context and exten).
ASTERISK-30209 #close
Change-Id: I001357177e9c3dca2b2b4eebc5650c1095b3da6f
Added an 'a' option to the GEOLOC_PROFILE function to allow
variable lists like location_info_refinement to be appended
to instead of replacing the entire list.
Added an 'r' option to the GEOLOC_PROFILE function to resolve all
variables before a read operation and after a Set operation.
Added a few missing parameters to the ones allowed for writing
with GEOLOC_PROFILE.
Fixed a bug where calling GEOLOC_PROFILE to read a parameter
might actually update the profile object.
Cleaned up XML documentation a bit.
ASTERISK-30190
Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
The trigger to perform outgoing geolocation processing is the
presence of a geoloc_outgoing_call_profile on an endpoint. This
is intentional so as to not leak location information to
destinations that shouldn't receive it. In a totally dynamic
configuration scenario however, there may not be any profiles
defined in geolocation.conf. This makes it impossible to do
outgoing processing without defining a "dummy" profile in the
config file.
This commit adds 4 built-in profiles:
"<prefer_config>"
"<discard_config>"
"<prefer_incoming>"
"<discard_incoming>"
The profiles are empty except for having their precedence
set and can be set on an endpoint to allow processing without
entries in geolocation.conf. "<discard_config>" is actually the
best one to use in this situation.
ASTERISK-30182
Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a
When producing an outgoing SDP we iterate through the configured
formats and produce SDP information. It is possible for some
configured formats to not have SDP information available. If this
is the case we skip over them to allow the SDP to still be
produced.
ASTERISK-29185
Change-Id: I3e37569aa4ca341260e6ca5904dc2f75e46a1749
If "core show channels" is run before startup has completed, it
is possible for bad ao2 refs to occur because the system is not
yet fully initialized. This will lead to an assertion failing.
To prevent this, initialization of CLI builtins is moved to be
later along in the main load sequence. Core CLI commands are
loaded at the same time, but channel-related commands are loaded
later on.
ASTERISK-29846 #close
Change-Id: If6b3cde802876bd738c1b4cf2683bea6ddc615b6
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
Fixes two typos that cause fax detection to not work.
One refers to the wrong frame variable, and the other
refers to the subclass.integer instead of the frametype
as it should.
ASTERISK-30192 #close
Change-Id: I7b35fdb7bcf25a29a212eee37c20812c64ab3ef1
The following required columns were missing,
now added to the ps_endpoints table:
incoming_call_offer_pref
outgoing_call_offer_pref
stir_shaken_profile
ASTERISK-29453
Change-Id: I5cf565edf30195844d6acbc1e1de8c5f0d837568
With gcc (Ubuntu 11.2.0-19ubuntu1) 11.2.0:
> chan_dahdi.c:4129:18: error: ‘%s’ directive output may be truncated
> writing up to 255 bytes into a region of size between 242 and 252
> [-Werror=format-truncation=]
This removes the error-prone sizeof(...) calculations in favor of just
doubling the size of the base buffer.
Change-Id: I2d276785286730d3d5d0a921bcea2e065dbf27c5
Set termination state to old subscriptions to prevent queueing and sending
NOTIFY messages on exten/device state changes.
Postpone destruction of old subscriptions until all already queued tasks
that may be using old subscriptions have completed.
ASTERISK-29906
Change-Id: I96582aad3a26515ca73a8460ee6756f56f6ba23b
The DECLARE_STRINGFIELD_SETTERS_FOR() declares ast_channel_name_set()
for us, so no need to declare it separately.
Change-Id: I4813a884ada475ddc62bca480bceb4a53b3ec59a
Adds additional control options over the transfer
feature functionality to give users more control
in how the transfer feature sounds and works.
First, the "transfer" sound that plays when a transfer is
initiated can now be customized by the user in
features.conf, just as with the other transfer sounds.
Secondly, the user can now specify the transfer extension
in advance by using the TRANSFER_EXTEN variable. If
a valid extension is contained in this variable, the call
will automatically be transferred to this destination.
Otherwise, it will fall back to collecting the extension
from the user as is always done now.
ASTERISK-29899 #close
Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3
Fixes a few coding guideline violations:
* Use of C99 comments
* Opening brace on same line as function prototype
ASTERISK-30163 #close
Change-Id: I07771c4c89facd41ce8d323859f022ddbddf6ca7
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
If the CONFBRIDGE function is used to dynamically set
menu options, a memory leak occurs when a menu option
that has been set is overridden, since the menu entry
is not destroyed before being freed. This ensures that
it is.
Additionally, logic that duplicates the destroy function
is removed in lieu of the destroy function itself.
ASTERISK-28422 #close
Change-Id: I71cfb5c24e636984d41086d1333a416dc12ff995
The manager XML documentation documents a "FilterList"
action, but there is no such action. Therefore, this can
lead to confusion when people try to use a documented
action that does not, in fact, exist. This is removed
as the action never did exist in the past, nor would it
be trivial to add since we only store the regex_t
objects, so the filter list can't actually be provided
without storing that separately. Most likely, the
documentation was originally added (around version 10)
in anticipation of something that never happened.
ASTERISK-29917 #close
Change-Id: I846b16fd6f80a91d4ddc5d8a861b522d7c6f8f97
Adjusts some logging levels to be more or less important,
that is more prominent when actual problems occur and less
prominent for less noteworthy things.
ASTERISK-30153 #close
Change-Id: Ifc8f7df427aa018627db462125ae744986d3261b
The CDR sample config still mentions that app_mysql
is available in the addons directory, but this is
incorrect as it was removed as of 19. This removes
that to avoid confusion.
ASTERISK-30160 #close
Change-Id: Ie5293ccb4f2b365896981811b480544e67bb9cd7
There are a handful of files in the tree that
reference an SVN link for the coding guidelines.
This removes these because the links are dead
and the vast majority of source files do not
contain these links, so this is more consistent.
app_skel still maintains an (up to date) link
to the coding guidelines.
ASTERISK-30159 #close
Change-Id: I35bbb20f66982e98099cff3029ede20091ffdac7
Documents the ConfbridgeListRooms AMI response,
which is currently not documented.
ASTERISK-30020 #close
Change-Id: Id6fff7a936244bae7b52686301eb740c1169cdea
The MeetmeList and MeetmeListRooms AMI
responses are currently completely undocumented.
This adds documentation for these responses.
ASTERISK-30018 #close
Change-Id: Id93135b7edf01de6f8fba266e2122989dc8996b8
Adds missing documentation for the field parameter
for the SRVRESULT function.
ASTERISK-30151
Reported by: Chris Young
Change-Id: I4385a2e0892a07e30dea1a8a0588e2c1bea2b1f1
When ast_func_read2 is used to read a function using
its read function (as opposed to a native ast_str read2
function), the result is copied directly by the function
into the ast_str buffer. As a result, the ast_str length
remains initialized to 0, which is a bug because this is
not the real string length.
This can cascade and have issues elsewhere, such as when
reading substrings of functions that only register read
as opposed to read2 callbacks. In this case, since reading
ast_str_strlen returns 0, the returned substring is empty
as opposed to the actual substring. This has caused
the ast_str family of functions to behave inconsistently
and erroneously, in contrast to the pbx_variables substitution
functions which work correctly.
This fixes this issue by manually updating the ast_str length
when the result is copied directly into the ast_str buffer.
Additionally, an assertion and a unit test that previously
exposed these issues are added, now that the issue is fixed.
ASTERISK-29966 #close
Change-Id: I4e2dba41410f9d4dff61c995d2ca27718248e07f
configure script detects /sbin/launchd, but the result of this
check is not used in Makefile (bininstall). Makefile also detects
/sbin/launchd file to decide if it is required to install
safe_asterisk.
configure script correctly detects cross compile build and sets
PBX_LAUNCHD=0
In case of building asterisk on MacOS host for Linux target using
external toolchain (e.g. OpenWrt toolchain), bininstall does not
install safe_asterisk (due to /sbin/launchd detection in Makefile),
but it is required on target (Linux).
This patch adds HAVE_SBIN_LAUNCHD=@PBX_LAUNCHD@ to makeopts.in to
use the result of /sbin/launchd detection from configure script in
Makefile.
Also this patch uses HAVE_SBIN_LAUNCHD in Makefile (bininstall) to
decide if it is required to install safe_asterisk.
ASTERISK-29905 #close
Change-Id: Iff61217276cd188f43f51ef4cdbffe39d9f07f65
Adds the DBGetTree action, which can be used to
retrieve all of the DB keys beginning with a
particular prefix, similar to the capability
provided by the database show CLI command.
ASTERISK-30136 #close
Change-Id: I3be9425e53be71f24303fdd4d2923c14e84337e6
The global event filtering code was only in one
possible execution path, so not all events were
being properly filtered out if requested. This moves
that into the universal AMI handling code so all
events are properly handled.
Additionally, the CLI listing of disabled events can
also get truncated, so we now print out everything.
ASTERISK-30137 #close
Change-Id: If8c42edcb2abc5158552da7eba2a8ff6b20e1959
Move the call to ast_sip_location_prune_boot_contacts() *after* the call
to ast_res_pjsip_init_options_handling() so that
res/res_pjsip/pjsip_options.c is informed about the contact deletion and
updates its sip_options_contact_statuses list. This allows for an AMI
event to be sent by res/res_pjsip/pjsip_options.c if the endpoint
registers again from the same remote address and port (i.e., same URI)
as used before the Asterisk restart.
ASTERISK-30109
Reported-by: Michael Neuhauser
Change-Id: I1ba4478019e4931a7085f62708d9b66837e901a8
There are several things wrong with analog Caller ID
handling that are fixed by this commit:
callerid.c's Caller ID generation function contains the
logic to use the presentation to properly send the proper
Caller ID. However, currently, DAHDI does not pass any
presentation information to the Caller ID module, which
means that presentation is completely ignored on all calls.
This means that lines could be getting Caller ID information
they aren't supposed to.
Part of the reason this has been obscured is because the
simple switch logic for handling the built in *67 and *82
is completely wrong. Rather than modifying the presentation
for the call accordingly (which is what it's supposed to do),
it simply blanks out the Caller ID or fills it in. This is
wrong, so wrong that it makes a mockery of the specification.
Additionally, it would leave to the "UNAVAILABLE" disposition
being used for Caller ID generation as opposed to the "PRIVATE"
disposition that it should have been using. This is now fixed
to only update the presentation and not modify the number and
name, so that the simple switch *67/*82 work correctly.
Next, sig_analog currently only copies over the name and number,
nothing else, when it is filling in a duplicated caller id
structure. Thus, we also now copy over the presentation
information so that is available for the Caller ID spill.
Additionally, this meant that "valid" was implicitly 0,
and as such presentation would always fail to "Unavailable".
The validity is therefore also copied over so it can be used
by ast_party_id_presentation.
As part of this fix, new API is added so that all the relevant
Caller ID information can be passed in to the Caller ID generation
functions. Parameters that are also completely missing from the
Caller ID spill have also been added, to enhance the compatibility,
correctness, and completeness of the Asterisk Caller ID implementation.
ASTERISK-29991 #close
Change-Id: Icc44a5e09979916f4c18a440f96e10dc1c76ae15
Adds a POLARITY function which can be used to
retrieve the current polarity of an FXS channel
as well as set the polarity of an FXS channel
to idle or reverse at any point during a call.
ASTERISK-30000 #close
Change-Id: If6f50998f723e4484bf68e2473f5cedfeaf9b8f1
make_version now silently checks if the required git commands will
fail. If they do, then return UNKNOWN__git_check_fail to
distinguish this failure from other UNKNOWN__ version failures
Makefile checks for this value on install and exits out with
instructions
ASTERISK-30029
Change-Id: If8f10cac8f509c08981120f17555762342020221
Currently, if multiple video-enabled ConfBridges are
conferenced together, we immediately get into a scenario
where an infinite sequence of video updates fills up
the taskprocessor queue and causes memory consumption
to climb unabated until Asterisk is killed. This is due
to the core bridging mechanism that provides video updates
(softmix_bridge_write_control in bridge_softmix.c)
continously updating all the channels in the bridge with
video updates.
The logic to do so in the core is that the video updates
should be provided if the video_update_discard property
for the bridge is 0, or if enough time has elapsed since
the last video update. Thus, we already have a safeguard
built in to ensure the scenario described above does not
happen. Currently, however, this safeguard is not being
adequately ensured.
In app_confbridge, the video_update_discard property
defaults to 2000, which is a healthy value that should
completely prevent this issue. However, this value is
only set onto the bridge in the SFU video mode. This
leaves video modes such as follow_talker completely
vulnerable, since video_update_discard will actually
be 0, since the default or set value was never applied.
As a result, the core bridging mechanism will always
try to provide video updates regardless of when the last
one was sent.
To prevent this issue from happening, we now always
set the video_update_discard property on the bridge
with the value from the bridge profile. The app_confbridge
defaults will thus ensure that infinite video updates
no longer happen in any video mode.
ASTERISK-29907 #close
Change-Id: I4accb2536ac62797950468e9930f12ef7dd486b2
Allocate all of the ast_context's character data in the structure's
flexible array member and eliminate the clunky fake_context. This will
simplify future changes to ast_context.
Change-Id: I98357de75d8ac2b3c4c9f201223632e6901021ea
line 196: loc_src = '\0';
should have been
line 196: *loc_src = '\0';
The issue was caught by the gcc optimizer complaining that
loc_src had a zero length because the pointer itself was being
set to NULL instead of the _contents_ of the pointer being set
to the NULL terminator.
ASTERISK-30138
Reported-by: Sean Bright
Change-Id: Id247be113cc8510f043ca053d5b4f5f3d32acd29
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
ASTERISK_30007 accidentally made OpenSSL a
required depdendency. This adds an ifdef so
the relevant code is compiled only if OpenSSL
is available, since it only needs to be executed
if OpenSSL is available anyways.
ASTERISK-30083 #close
Change-Id: Iad05c1a9a8bd2a48e7edf8d234eaa9f80779e34d
A sporadic test failure was happening when executing the AEAP
Websocket transport tests. It was originally thought this was
due to things not getting cleaned up fast enough, but upon further
investigation I determined the underlying cause was poll()
getting interrupted and this not being handled in all places.
This change adds EINTR and EAGAIN handling to the Websocket
client connect code as well as the AEAP Websocket transport code.
If either occur then the code will just go back to waiting
for data.
The originally disabled failure test case has also been
re-enabled.
ASTERISK-30099
Change-Id: I1711a331ecf5d35cd542911dc6aaa9acf1e172ad
Adds a CLI command similar to "dialplan eval function" except for
applications: "dialplan exec application", useful for quickly
testing certain application behavior directly from the CLI
without writing any dialplan.
ASTERISK-30062 #close
Change-Id: I42e9fa9b60746c21450d40f99a026d48d2486dde
The current documentation is out of date and does not reflect actual
behaviour. This change makes documentation clearer and accurately
reflect the purpose of relevant channel variables.
ASTERISK-30123
Change-Id: I160d0b01fce862477ad55ac1aa708a730473eb6f
* Added ast_variable_list_from_quoted_string()
Parse a quoted string into an ast_variable list.
* Added ast_str_substitute_variables_full2()
Perform variable/function/expression substitution on an ast_str.
* Added ast_strsep_quoted()
Like ast_strsep except you can specify a specific quote character.
Also added unit test.
* Added ast_xml_find_child_element()
Find a direct child element by name.
* Added ast_xml_doc_dump_memory()
Dump the specified document to a buffer
* ast_datastore_free() now checks for a NULL datastore
before attempting to destroy it.
Change-Id: I5dcefed2f5f93a109e8b489e18d80d42e45244ec
These new functions allow retrieving information from headers on 200 OK
INVITE response.
ASTERISK-29999
Change-Id: I264a610a9333359297a0825feb29a1bb4f4ad144
Switched res_pjsip_outbound_registration.so dep to optional. Added
module loaded check before using it.
ASTERISK-30101 #close
Change-Id: Ia34f1684d984e821fbdd4de8911f930337703666
ASTERISK_28638 caused a regression by incorrectly aborting
early and overwriting the status on certain calls.
This was exhibited by certain technologies such as DAHDI,
where DAHDI returns NULL for the request if a line is busy.
This caused the BUSY condition to be incorrectly treated
as CHANUNAVAIL because the DIALSTATUS was getting incorrectly
overwritten and call handling was aborted early.
This is fixed by instead checking if any valid peers have been
specified, as opposed to checking the list size of successful
requests. This is because the latter could be empty but this
does not indicate any kind of problem. This restores the
previous working behavior.
ASTERISK-29989 #close
Change-Id: I4d4b209b967816b1bc791534593ababa2b99bb88
Currently, if using the CLI to delete a DB entry,
"Database entry removed" is always returned,
regardless of whether or not the entry actually
existed in the first place. This meant that users
were never told if entries did not exist.
The same issue occurs if trying to delete a DB key
using AMI.
To address this, new API is added that is more stringent
in deleting values from AstDB, which will not return
success if the value did not exist in the first place,
and will print out specific error details if available.
ASTERISK-30001 #close
Change-Id: Ic84e3eddcd66c7a6ed7fea91cdfd402568378b18
A corner case exists in CLI parsing where if
a CLI user in a remote console ends with
a backslash and then invokes command completion
(using TAB or ?), then the console will freeze
forever until a SIGQUIT signal is sent to the
process, due to getting blocked forever
reading the command completion. CTRL+C
and other key combinations have no impact on
the CLI session.
This occurs because, in such cases, the CLI
process is waiting for AST_CLI_COMPLETE_EOF
to appear in the buffer from the main process,
but instead the main process is confused by
the funny syntax and thus prints out the CLI help.
As a result, the CLI process is stuck on the
read call, waiting for the completion that
will never come.
This prevents blocking forever by checking
if the data from the main process starts with
"Usage:". If it does, that means that CLI help
was sent instead of the tab complete vector,
and thus the CLI should bail out and not wait
any longer.
ASTERISK-29822 #close
Change-Id: I9810ac59304fec162da701653c9c834f0ec8f670
The Dial application currently stops hook flashes
dead in their tracks from propagating through on
outbound calls. This fixes that so they can go
down the wire.
ASTERISK-30115 #close
Change-Id: Id4e78b29a049f35c5b1e7520eaa10d0eb5b7f97c
Microsoft recently began rejecting all requests for
ICS calendars on Office 365 with 400 errors if
the request doesn't contain a user agent. See:
https://docs.microsoft.com/en-us/answers/questions/883904/34the-remote-server-returned-an-error-400-bad-requ.html
Accordingly, we now send a user agent on requests for
ICS files so that requests to Office 365 will work as
they did before.
ASTERISK-30106
Change-Id: Ie9dcaef12ae8adf37533c684499eb11005fac8f7
If the caller has hung up, break out of the play loop so we don't try
to play remaining files and fail to do so.
ASTERISK-30075 #close
Change-Id: I55e85be28ee90b48c0fe4ce20ac136a7dbb49f14
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Finding an application and executing it if found is
a common task throughout Asterisk. This adds a helper
function around pbx_exec to do this, to eliminate
redundant code and make it easier for modules to
substitute variables and execute applications by name.
ASTERISK-30061 #close
Change-Id: Ifee4d2825df7545fb515d763d393065675140c84
A previous review fixing ASTERISK_22246 and ASTERISK_26582
got a couple of the options mixed up as to whether or not
they are compatible with the remote console. This fixes
those to the best of my knowledge.
ASTERISK-30097 #close
Change-Id: Id54166991aa79f04fb02699cc499bedda854253b
The 'transport_binary' test sporadically fails, but on a theory that the
problem is caused by a previously executed test, transport_connect_fail,
part of that test has been disabled until a solution is found.
ASTERISK_30099
Change-Id: I48ed74d696aa9b6159f59661f3d535cac4c909e1
Three-way calling for analog lines is currently broken.
If party A is on a call with party B and initiates a
three-way call to party C, the behavior differs depending
on whether the call is conferenced prior to party C
answering. The post-answer case is correct. However,
if A flashes before C answers, then the next flash
disconnects B rather than C, which is incorrect.
This error occurs because the subs are not swapped
in the misbehaving case. This is because the flash
handler only swaps the subs if C has answered already,
which is wrong. To fix this, we swap the subs regardless
of whether C has answered or not when the call is
conferenced. This ensures that C is disconnected
on the next hook flash, rather than B as can happen
currently.
ASTERISK-30043 #close
Change-Id: I96c5bf6c9b7eb2636136b716c677c82c079b6f06
Adds an option to VoiceMailMain that prevents the user
from deleting messages during that application invocation.
This can be useful for public or shared mailboxes, where
some users should be able to listen to messages but not
delete them.
ASTERISK-30063 #close
Change-Id: Icdfb8423ae8d1fce65a056b603eb84a672e80a26
An m option to Park and ParkAndAnnounce now allows
specifying a music on hold class override.
ASTERISK-30087
Change-Id: I03de8d97b100e451b2611b5a621d48750f5d6a9e
Currently, PJSIP will randomly wait up to 10 seconds for each
outbound registration's initial attempt. The reason for this
is to avoid having all outbound registrations attempt to register
simultaneously.
This can create limitations with the test suite where we need to
be able to receive inbound calls potentially within 10 seconds of
starting up. For instance, we might register to another server
and then try to receive a call through the registration, but if
the registration hasn't happened yet, this will fail, and hence
this inconsistent behavior can cause tests to fail. Ultimately,
this requires a smaller random value because there may be no good
reason to wait for up to 10 seconds in these circumstances.
To address this, a new config option is introduced which makes this
maximum delay configurable. This allows, for instance, this to be
set to a very small value in test systems to ensure that registrations
happen immediately without an unnecessary delay, and can be used more
generally to control how "tight" the initial outbound registrations
are.
ASTERISK-29965 #close
Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd
When a pjsip endpoint is defined with timers=always, this has been a
functional noop. This patch correctly sets the feature bitmap to both
enable support for session timers and to enable them even when the
endpoint itself does not request or support timers.
ASTERISK-29603
Reported-By: Ray Crumrine
Change-Id: I8b5eeaa9ec7f50cc6d96dd34c2b4aa9c53fb5440
If there is scheduled notification, we must delete it
to avoid using destroyed subscriptions.
ASTERISK-29906
Change-Id: I1c644e5e15a8fe43eed8e4f9112f113cbf87a40f
In function ast_say_date_with_format_de(), take special
care when the hour is one o'clock. In this case, the
German number "eins" must be inflected to its neutrum form,
"ein". This is achieved by playing "digits/1N" instead of
"digits/1". Fixes both 12- and 24-hour formats.
ASTERISK-30092
Change-Id: Ica9b80125c0b317e378d89c1ea786816e2635510
If a switch is invoked using chan_iax2, deadlock can result
because the PBX core is autoservicing the channel while chan_iax2
also then attempts to service it while waiting for the result
of the switch. This removes servicing of the channel to prevent
any conflicts.
ASTERISK-30064 #close
Change-Id: Ie92f206d32f9a36924af734ddde652b21106af22
If tab completion using ast_module_helper is attempted
during startup, deadlock will ensue because the CLI
will attempt to lock the module list while it is already
locked by the loader. This causes deadlock because when
the loader tries to acquire the CLI lock, they are blocked
on each other.
Waiting for startup to complete is not feasible because
the CLI lock is acquired while waiting, so deadlock will
ensure regardless of whether or not a lock on the module
list is attempted.
To prevent deadlock, we immediately abort if tab completion
is attempted on the module list before Asterisk is fully
booted.
ASTERISK-30039 #close
Change-Id: Idd468906c512bb196631e366a8f597a0e2e9271d
res_calendar will trigger an assertion currently
if the ending time is calculated to be in the past.
Unlike the reminder and start times, however, there
is currently no check to catch non-positive times
and set them to 1. As a result, if we get a negative
value by happenstance, this can cause a crash.
To prevent the assertion from begin triggered, we now
use the same logic as the reminder and start events
to catch this issue before it can cause a problem.
ASTERISK-29981 #close
Change-Id: Idfb3204d195f350d2575fb4bc72a54a597d6e93c
Emits a warning if the user has requested a parking spot that
is out of bounds for the requested parking lot.
ASTERISK-30086
Change-Id: I1080371e4f63e94724455003753014fbd3f95fbf
When a PJSIP channel is set on hold or off hold, all streams were set
on/off hold. This is not the desired behaviour and caused issues
when there were multiple streams in the topology.
Now, only the default audio stream is set on/off hold when a hold is
indicated.
ASTERISK-30051
Change-Id: I04f1110565fd05fea565f5539b534b54549d4f71
The change "Add LOCAL/REMOTE tags in dialog-info+xml" set both "local"
Identity Element URI and Target Element URI to the same value -
the channel Caller Number.
For Identity Element it's ok to set as Caller ID.
But Local Target URI should be set as local URI.
In this case the Local Target URI can be used for Directed Call Pickup
by Polycom ip-phones (parameter useLocalTargetUriforLegacyPickup).
Also XML sanitized Display names.
ASTERISK-24601
Change-Id: If130a2f2f3b2339b14dca0ec0ebeea3a87b34343
Agi commnad exec can now evaluate dialplan functions and
variables if variable AGIEXECFULL is set to yes. this can
be useful when executing Playback or Read from agi.
ASTERISK-30058 #close
Change-Id: I669991f540496e7bddd096fec82b52c083036832
This change exposes the channel driver's unique id (i.e. the Call-ID
for chan_sip/chan_pjsip based channels) to ARI channel resources
as `protocol_id`.
ASTERISK-30027
Reported by: Moritz Fain
Tested by: Moritz Fain
Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87
As part of PJSIP 2.11 a behavior change was done to require
a matching remote hostname on an established transport for
secure transports. Since the Websocket transport is considered
a secure transport this caused the existing connection to not
be found and used.
We now set the remote hostname and the transport can be found.
ASTERISK-30065
Change-Id: Ia1cdef33e1411f927985b4b852c95e163c080e94
This is needed to be able to restore it in REGISTER responses,
otherwise the client won't be able to find the contact it created.
ASTERISK-30042
Change-Id: I0c5823918199acf09246b3b206fbde66773688f6
Adjusts the pjsip show registration(s) commands to show
the amount of seconds remaining until a registration
expires.
ASTERISK-29845 #close
Change-Id: Ic4fea15a1a1056c424416def49d1ca8e776c0483
Adds the CONFBRIDGE_CHANNELS function which can be used
to retrieve a comma-separated list of channels, filtered
by a particular type of participant category. This output
can then be used with functions like UNSHIFT, SHIFT, POP,
etc.
ASTERISK-30036 #close
Change-Id: I1950aff932437476dc1abab6f47fb4ac90520b83
Currently, the operator services mode in DAHDI is broken and unusable.
The actual operator recall functionality works properly; however,
when the operator hangs up (which is the only way that such a call
is allowed to end), both lines are permanently taken out of service
until "dahdi restart" is run. This prevents this feature from being
used.
Operator mode is one of the few factors that can cause the general
analog event handling in sig_analog not to be used. Several years
back, much of the analog handling was moved from chan_dahdi to
sig_analog. However, this was not done fully or consistently at
the time, and when operator mode is active, sig_analog does not
get used. Generally this is correct, but in the case of hangup
it should be using sig_analog regardless of the operator mode;
otherwise, the lines do not properly clear and they become unusable.
This bug is fixed so the operator can now hang up and properly
release the call. It is treated just like any other hangup. The
operator mode functionality continues to work as it did before.
ASTERISK-29993 #close
Change-Id: Ib2e3ddb40d9c71e8801e0b4bb0a12e2b52f51d24
Most issues were in stringfields and had to do with comparing
a pointer to an constant/interned string with NULL. Since the
string was a constant, a pointer to it could never be NULL so
the comparison was always "true". gcc now complains about that.
There were also a few issues where determining if there was
enough space for a memcpy or s(n)printf which were fixed
by defining some of the involved variables as "volatile".
There were also a few other miscellaneous fixes.
ASTERISK-30044
Change-Id: Ia081ca1bcfb329df6487c4660aaf1944309eb570
GCC 12 caught an issue in state_id_by_topic where we were
checking a pointer for NULL instead of the contents of
the pointer for '\0'.
ASTERISK-30044
Change-Id: Ia0b04d4fff45c92acb7f07132a33622fa341148e
When a new unreal (local) channel is created, a second (;2) channel is
created as a counterpart which clones the topology of the first
channel. This creates issues when an outgoing stream is sendonly or
recvonly as the stream state of the inbound channel will be the same
as the stream state of the outbound channel.
Now the stream state is flipped for the streams of the 2nd channel in
ast_unreal_new_channels if the outgoing stream topology is recvonly or
sendonly.
ASTERISK-29655
Reported by: Michael Auracher
ASTERISK-29638
Reported by: Michael Auracher
Change-Id: I0cea29635bb20b7bf7fd0fb95498cd44dab98fbf
Documents the Dial syntax for DAHDI, namely the channel group,
distinctive ring, answer confirmation, and digital call options
that are specified in the resource itself.
ASTERISK-24827 #close
Change-Id: Ib95e78497fb00dc5cbfde1c93a69f034bfd08c30
For lines that have mailboxes configured on them, with
FSK MWI, DAHDI will periodically try to dispatch FSK
to update MWI. However, this is never supposed to be
done when a channel is not idle.
There is currently an edge case where MWI FSK can
extraneously get spooled for the channel if a caller
hook flashes and hangs up, which triggers a recall ring.
After one ring, the on hook time threshold in this if
condition has been satisfied and an MWI update is spooled.
This means that when the phone is picked up again, the
answerer gets an FSK spill before being reconnected to
the party on hold.
To prevent this, we now explicitly check to ensure that
subchannel 0 has no owner. There is no owner when DAHDI
channels are idle, but if the channel is "in use" in some
way (such as in the aforementioned scenario), then there
is an owner, and we shouldn't process MWI at this time.
ASTERISK-28518 #close
Change-Id: Ia3904434fd81688d71742f7e84358b7e1c38e92a
Added the hear_own_join_sound option to the confbridge user profile to
control who hears the sound_join audio file. When set to 'yes' the user
entering the conference and the participants already in the conference
will hear the sound_join audio file. When set to 'no' the user entering
the conference will not hear the sound_join audio file, but the
participants already in the conference will hear the sound_join audio
file.
ASTERISK-29931
Added by Michael Cargile
Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2
Currently, if any custom ring cadences are specified, they are
appended to the array of cadences from wherever we left off
last time. This works properly the first time, but on subsequent
dahdi restarts, it means that the existing cadences are left
alone and (most likely) the same cadences are then re-added
afterwards. In short order, the cadence array gets maxed out
and the user begins seeing warnings that the array is full
and no more cadences may be added.
This buggy behavior persists until Asterisk is completely
restarted; however, if and when dahdi restart is run again,
then the same problem is reintroduced.
This fixes this behavior so that cadence parsing is more
idempotent, that is so running dahdi restart multiple times
starts adding cadences from the beginning, rather than from
wherever the last cadence was added.
As before, it is still not possible to revert to the default
cadences by simply removing all cadences in this manner, nor
is it possible to delete existing cadences. However, this
does make it possible to update existing cadences, which
was not possible before, and also ensures that the cadences
remain unchanged if the config remains unchanged.
ASTERISK-29990 #close
Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d
Currently, if attempting to place a call to a peer that only allows
RSA authentication, if we fail to provide an outkey when placing
the call, Asterisk will crash.
This exposes the broader issue that IAX2 is prone to causing a crash
if encryption or decryption is attempted but we never initialized
the encryption and decryption keys. In other words, if the logic
to use encryption in chan_iax2 is not perfectly aligned with the
decision to build keys in the first place, then a crash is not
only possible but probable. This was demonstrated by ASTERISK_29264,
for instance.
This permanently prevents such events from causing a crash by explicitly
checking that keys are initialized properly before setting the flags
to use encryption for the call. Instead of crashing, the call will
now abort.
ASTERISK-30007 #close
Change-Id: If925c3d86099ceac7f621804f2532baac5050c9a
A bug in menuselect can cause modules that are disabled
by default to be recompiled every time a recompilation
occurs. This occurs for module categories that are NOT
positive output, as for these categories, the modules
contained in the makeopts file indicate modules which
should NOT be selected. The existing procedure of iterating
through these modules to mark modules as present is thus
insufficient. This has led to modules with a default_enabled
tag of "no" to get deleted and recompiled every time, even
when they haven't changed.
To fix this, we now modify the mark as present behavior
for module categories that are not positive output. For
these, we start by iterating through the module tree
and marking all modules as present, then go back and
mark anything contained in the makeopts file as not
present. This ensures that makeopt selections are actually
used properly, regardless of whether a module category
uses positive output or not.
ASTERISK-29728 #close
Change-Id: Idf2974c4ed8d0ba3738a92f08a6082b234277b95
The admin_exec function in app_meetme is used by the SLA
applications for internal bridging. However, in these cases,
chan is NULL. Currently, this function will set some status
variables that are intended for a channel, but since channel
is NULL, this is erroneously creating meaningless global
variables, which shouldn't be happening. This sets these
variables only if chan is not NULL.
ASTERISK-30002 #close
Change-Id: I817df6c26f5bda131678e56791b0b61ba64fc6f7
Some command line options to Asterisk only apply when Asterisk
is started and cannot be used with remote console mode. If a
user tries to use any of these, they are currently simply
silently ignored.
This prints out a warning if incompatible options are used,
informing users that an option used cannot be used with remote
console mode. Additionally, some clarifications are added to
the help text and man page.
ASTERISK-22246
ASTERISK-26582
Change-Id: I980a5380ef2c19e8ea348596396d5382893c4337
Adds the DB_KEYCOUNT function, which can be used to retrieve
the number of keys at a given prefix in AstDB.
ASTERISK-29968 #close
Change-Id: Ib2393b77b7e962dbaae6192f8576bc3f6ba92d09
According to chan_dahdi.conf, up to 64 groups (numbered
0 through 63) can be used when dialing DAHDI channels.
However, currently dialing round robin with a group number
greater than 31 fails because the array for the round robin
structure is only size 32, instead of 64 as it should be.
This fixes that so the round robin array size is consistent
with the actual groups capacity.
ASTERISK-29994
Change-Id: I4caa08d7025f78ac75a0539f71aaf3eb3e85b3b7
If Asterisk receives a SIP REFER with Session-Timers UAC
maintain Session-Timers when sending UPDATE"
ASTERISK-29843
Change-Id: I8e9a21c13bf757fa34d778f49ba3cf859b29ae5c
This adds the EVAL_EXTEN function, which may be used to retrieve
the variable-substituted data at any extension.
ASTERISK-29486
Change-Id: Iad81019689674c9f4ac77d235f5d7234adbb1432
Currently, if a user uses an application like ControlPlayback
to try to rewind a file past the beginning, this can throw
warnings when the file format (e.g. PCM) tries to seek to
a negative offset.
Instead of letting file formats try (and fail) to seek a
negative offset, we instead now catch this in the rewind
function to ensure that we never seek an offset less than 0.
This prevents legitimate user actions from triggering warnings
from any particular file formats.
ASTERISK-29943 #close
Change-Id: Ia53f2623f57898f4b8e5c894b968b01e95426967
PJSIP currently is capable of receiving flash events
and converting them to FLASH control frames, but it
currently lacks support for doing the reverse: taking
a FLASH control frame and converting it into a flash
event in the SIP domain.
This adds the ability for PJSIP to process flash control
frames by converting them into the appropriate SIP INFO
message, which can then be sent to the peer. This allows,
for example, flash events to be sent between Asterisk
systems using PJSIP.
ASTERISK-29941 #close
Change-Id: I1590221a4d238597f79672fa5825dd4a920c94dd
Adds the dialplan eval function commands to evaluate a dialplan
function from the CLI. The return value and function result are
printed out and can be used for testing or debugging.
ASTERISK-29820 #close
Change-Id: I833e97ea54c49336aca145330a2adeebfad05209
Adds version information for applications, functions,
and manager events/actions.
This is not completely exhaustive by any means but
covers most new things added that have release
versioning information in the issue tracker.
ASTERISK-29940 #close
Change-Id: I506401e93c799715dbbe97c0a8ba18af2bf5e131
Removes a couple sample config files for modules
which have since been removed from Asterisk.
ASTERISK-30008 #close
Change-Id: I6be89cafc6c575d98a5315e4912b61a833aacf52
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
if Asterisk need to send an UPDATE before answer
on a channel that uses Record-Route:
it will not include a Route header
ASTERISK-29955
Change-Id: Id1920ecbfea7739a038b14dc94487ecfe7b57eef
On a write error to an AMI session a flag was set to
indicate that the write error had occurred, with the
expected result being that the session be terminated.
This was not actually happening and instead writing
would continue to be attempted.
This change adds a check for the write error and causes
the session to actually terminate.
ASTERISK-29948
Change-Id: Icaf5d413d4c0d5dc78292a17287fecc8720a31a5
Patch provided inline by Yury Kirsanov on the linked issue and
approved by Josh Colp.
ASTERISK-29253 #close
Change-Id: I5b9ccc67ebf06e875ed061d9e7fc21f47b0a4e1f
Add framework to connect to, and read and write protocol based
messages from and to an external application using an Asterisk
External Application Protocol (AEAP). This has been divided into
several abstractions:
1. transport - base communication layer (currently websocket only)
2. message - AEAP description and data (currently JSON only)
3. transaction - links/binds requests and responses
4. aeap - transport, message, and transaction handler/manager
This patch also adds an AEAP implementation for speech to text.
Existing speech API callbacks for speech to text have been completed
making it possible for Asterisk to connect to a configured external
translator service and provide audio for STT. Results can also be
received from the external translator, and made available as speech
results in Asterisk.
Unit tests have also been created that test the AEAP framework, and
also the speech to text implementation.
ASTERISK-29726 #close
Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2
When executing dial, the topology of the incoming channel is cloned and
used for the outgoing channel. This creates issues when an incoming
stream is sendonly or recvonly as the stream state of the outgoing
channel will be the same as the stream state of the incoming channel.
Now the stream state is flipped for the outgoing stream in
dial_exec_full if the incoming stream topology is recvonly or sendonly.
ASTERISK-29655
Reported by: Michael Auracher
ASTERISK-29638
Reported by: Michael Auracher
Change-Id: I294dc834ac9a5f048b101b691669959e9df630e1
There was an issue with the conditional where STIR/SHAKEN would be
enabled even when not configured. It has been changed to ensure that if
a profile does not exist and stir_shaken is not set in pjsip.conf, then
the conditional will return from the function without performing
STIR/SHAKEN operations.
ASTERISK-30024
Change-Id: I41286a3d35b033ccbfbe4129427a62cb793a86e6
The async_operations setting on a transport configures how
many simultaneous incoming packets the transport can handle
when multiple threads are polling and waiting on the transport.
As we only use a single thread this was needlessly creating
incoming packets when set to a non-default value, wasting memory.
ASTERISK-30006
Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f
Chrome has added more attributes, causing the limit to be
exceeded. This raises it up some more.
ASTERISK-30015
Change-Id: I964957c005c4e6f7871b15ea1ccd9b4659c7ef32
Adds a new configuration option, stir_shaken_profile, in pjsip.conf that
can be specified on a per endpoint basis. This option will reference a
stir_shaken_profile that can be configured in stir_shaken.conf. The type
of this option must be 'profile'. The stir_shaken option can be
specified on this object with the same values as before (attest, verify,
on), but it cannot be off since having the profile itself implies wanting
STIR/SHAKEN support. You can also specify an ACL from acl.conf (along
with permit and deny lines in the object itself) that will be used to
limit what interfaces Asterisk will attempt to retrieve information from
when reading the Identity header.
ASTERISK-29476
Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406
Put checks in place to limit how much we will actually download, as well
as a check for the data we receive at the start to ensure it begins with
what we would expect a certificate to begin with.
ASTERISK-29872
Change-Id: Ifd3c6b8bd52b8b6192a04166ccce4fc8a8000b46
Some databases depending on their configuration using backslashes
for escaping. When combined with the use of ' this can result in
a broken func_odbc query.
This change adds a SQL_ESC_BACKSLASHES dialplan function which can
be used to escape the backslashes.
This is done as a dialplan function instead of being always done
as some databases do not require this, and always doing it would
result in incorrect data being put into the database.
ASTERISK-29838
Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d
The ReceiveMF and ReceiveSF applications currently always
return 0, even if a channel has hung up. The call will still
end but generally applications are expected to return -1 if
the channel has hung up.
We now return -1 if a hangup occured to bring this behavior
in line with this norm. This has no functional impact, but
merely increases conformity with how these modules interact
with the PBX core.
ASTERISK-29951 #close
Change-Id: I234d755050ab8ed58f197c6925b968ba26b14033
Adds the m option to the Queue application, which allows a
music on hold class to be specified at runtime which will
override the class configured in queues.conf.
This option functions like the m option to Dial.
ASTERISK-29876 #close
Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7
Currently, if a user tries to access a non-dynamic
MeetMe conference and the conference is not found,
the call simply silent hangs up. There is no indication
to the user that anything went wrong at all.
This changes the relevant debug message to a warning
so that the user is notified of this invalidity.
ASTERISK-29954 #close
Change-Id: Iebcfae3755d00f2150d676ee211c57bc59530048
Removes some leftover build and config references to
modules that have since been removed from Asterisk.
ASTERISK-29935 #close
Change-Id: Iaefc73a23f4b2de3c6c14d928050135b6d0ef6af
When adding headers to an outgoing request the headers were cloned using
the dialog's pool when they should have been cloned using tdata's pool.
Under certain circumstances it was possible for the dialog object, and
its pool to be freed while tdata is still active and available. Thus the
cloned header "disappeared", and when tdata tried to later access it a
crash would occur.
This patch makes it so all added headers are cloned appropriately using
tdata's pool.
ASTERISK-29411 #close
ASTERISK-29535 #close
Change-Id: I9852025b5ee93ce1c038209150ee9dba1e0767c5
Several modules removal and deprecations occurred in 19.0.0 (initial
19 release), but associated UPGRADE files were not removed from
staging for some reason in the master branch.
This patch removes those files, and also removes a spurious leftover
header, chan_phone.h (associated module removed in 19).
Change-Id: Ib92142c846b45c882d6b2b6caca7225253c83add
This change removes patches which have been merged into
upstream and updates some existing ones. It also adds
some additional config_site.h changes to restore previous
behavior, as well as a patch to allow multiple Authorization
headers. There seems to be some confusion or disagreement
on language in RFC 8760 in regards to whether multiple
Authorization headers are supported. The RFC implies it
is allowed, as does some past sipcore discussion. There is
also the catch all of "local policy" to allow it. In
the case of Asterisk we allow it.
ASTERISK-29351
Change-Id: Id39ece02dedb7b9f739e0e37ea47d76854af7191
The PBX core uses the stack when it comes to includes, which
means that a context can only contain strictly fewer than
AST_PBX_MAX_STACK includes. If this is exceeded, then warnings
will be emitted for each number of includes beyond this if
searching for an extension in the including context, and if
the extension's inclusion is beyond the stack size, it will
simply not be found.
To address this, we now check if there are too many includes
in a context when the dialplan is reloaded so that if there
is an issue, the user is aware of at "compile time" as opposed
to "run time" only. Secondly, more details are printed out
when this message is encountered so it's clear what has happened.
ASTERISK-26719
Change-Id: Ia3700452e75a7af3391b3e82ee69f06a669f8958
make_xml_documentation was being called with the --validate
flag set when it shouldn't have been. This was causing
build failures if neither xmllint nor xmlstarlet were installed.
The correct behavior is to simply print a message that either
one of those tools should be installed for validation and
continue with the build.
ASTERISK-29988
Change-Id: Idc6c44114e7dd3fadae183a4e22f4fdba0b8a645
get_sourceable_makeopts wasn't handling variables with embedded
double quotes in them very well. One example was the DOWNLOAD
variable when curl was being used instead of wget. Rather than
trying to fix get_sourceable_makeopts, it's just been removed.
ASTERISK-29986
Reported by: Stefan Ruijsenaars
Change-Id: Idf2a90902228c2558daa5be7a4f8327556099cd2
The iax2 show netstats command previously didn't contain
enough spacing in the header to properly align the table
header with the table body. This caused column headers
to not align with the values on longer channel names.
Some spacing is added to account for the longest channel
names that display (before truncation occurs) so that
columns are always properly aligned.
ASTERISK-29895 #close
patches:
61205_misaligned2.patch submitted by Birger Harzenetter (license 5870)
Change-Id: I450ce6bb81157b9d6d149007e53b749f237b6d9f
There is work going on to update our OpenSSL usage to avoid the
deprecated functions but in the meantime make it possible to compile
in devmode.
Change-Id: Ib082eb8b3751f0185d8aa8fe127da664c93f0726
Adding information in the readme about running the install_preqreq script to install components that the ./configure script might indicate as missing.
ASTERISK-29976 #close
Change-Id: Ic287b46300168729838bddd8f9265e98fc22bce6
ASTERISK_22025 introduced a regression that shows
the host IP and port as the perceived IP and port
again, as opposed to showing the actual perceived
address. This fixes this by showing the correct
information.
ASTERISK-29048 #close
Change-Id: I0ad3e25bc6b449e83ce72ea5d1a1cdba72aa304a
Change RTP timer behavior for detecting RTP only after two-way
SDP channel establishment. Ignore detecting after receiving 183
with SDP or while direct media is used.
Make rtp_timeout and rtp_timeout_hold options consistent to rtptimeout
and rtpholdtimeout options in chan_sip.
ASTERISK-26689 #close
ASTERISK-29929 #close
Change-Id: I07326d5b9c40f25db717fd6075f6f3a8d77279eb
Use pkg-config to detect libxml2, falling back to xml2-config if the
former is not available.
This patch ensures Asterisk continues to build on systems without
xml2-config installed.
The patch also updates the associated 'configure' files.
ASTERISK-29970 #close
Change-Id: I3c90dfe0b0590486cbb8e6d426a7c5c4199410c0
Treat time_t's as entirely unique and use the POSIX API's for
converting to/from strings.
Lastly, a 64-bit integer formats as 20 digits at most in base10.
Don't need to have any 100 byte buffers to hold that.
ASTERISK-29674 #close
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Change-Id: Id7b25bdca8f92e34229f6454f6c3e500f2cd6f56
When asterisk generates the RLMI part of NOTIFY request,
the asterisk uses the local contact uri instead of the URI to which
the SUBSCRIBE request is sent.
Because of this mismatch some IP phones (for example Cisco 5XX) ignore
this list.
According
https://datatracker.ietf.org/doc/html/rfc4662#section-5.2
The first mandatory <list> attribute is "uri", which contains the uri
that corresponds to the list. Typically, this is the URI to which
the SUBSCRIBE request was sent.
https://datatracker.ietf.org/doc/html/rfc4662#section-5.3
The "uri" attribute identifies the resource to which the <resource>
element corresponds. Typically, this will be a SIP URI that, if
subscribed to, would return the state of the resource.
This patch makes asterisk to generate URI using SUBSCRIBE request URI.
ASTERISK-29961 #close
Change-Id: I1fcfc08fd589677f40608c59a4e143c45ee05f6c
Adds documentation for all of the possible return values
for the DIALSTATUS variable in the Dial application.
ASTERISK-25716
Change-Id: Id22593f1f1f7ea86e5734cee49516ec50848e8c0
Using the length of a file found on the filesystem rather than the
file being requested could result in filenames whose names are
substrings of another to be erroneously matched.
We now ensure a complete comparison before returning a positive
result.
ASTERISK-29960 #close
Change-Id: Id3ffc77681b9b75b8569062f3d952a128a21c71a
Passing 0 as the last argument to strtoimax() or strtoumax() causes
octal and hexadecimal to be accepted which was not originally
intended. So we now force to only accept decimal.
ASTERISK-29950 #close
Change-Id: I93baf0f273441e8280354630a463df263a8c0edd
MUSL defines BUFSIZ as 1024 which is not reasonable for log messages.
More broadly, BUFSIZ is the amount of buffering stdio.h does, which
is arbitrary and largely orthogonal to what logging should accept
as the maximum message size.
ASTERISK-29928
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Change-Id: Iaa49fbbab029c64ae3d95e4b18270e0442cce170
BackGround and WaitExten both accept options that are not
currently documented. This adds documentation for these
options to the xml documentation for each application.
ASTERISK-29967 #close
Change-Id: If812a9f1ccbba3e4d427a0e7a6dea923c2f905f7
This patch makes the Resource List Subscriptions (RLS) dynamic.
The asterisk updates the current subscriptions to reflect the changes
to the list on the subscriptions refresh. If list items are added,
removed, updated or do not exist anymore, the asterisk regenerates
the resource list.
ASTERISK-29906 #close
Change-Id: Icee8c00459a7aaa43c643d77ce6f16fb7ab037d3
The XML documentation for the SET MUSIC AGI
command is invalid, as the parameter does not
have a name and the on/off enum options for
the on/off argument are listed separately, which
is incorrect. The cumulative effect of these currently
is that the Asterisk Wiki documentation for SET MUSIC
is broken and external documentation generators crash
on SET MUSIC due to the malformed documentation.
These issues are corrected so that the documentation
can be successfully parsed as with other similar AGI
commands.
ASTERISK-29939 #close
ASTERISK-28891 #close
Change-Id: I8c3d59897531bcbc401cbc7b00c9e2829dcb35f8
Omit "unsupported column type 'text'" warning in logs while
using text-type column in the PgSQL backend.
ASTERISK-29924 #close
Change-Id: I48061a7d469426859670db07f1ed8af1eb814712
This adds a new AMI action called QueueWithdrawCaller.
This AMI action makes it possible to withdraw a caller from a queue,
in a safe and a generic manner.
This can be useful for retrieving a specific call and
dispatching it to a specific extension.
It works by signaling the caller to exit the queue application
whenever it can. Therefore, it is not guaranteed
that the call will leave the queue.
ASTERISK-29909 #close
Change-Id: Ic15aa238e23b2884abdcaadff2fda7679e29b7ec
ASTERISK_29853 added the ability to selectively disable
AMI events on a global basis, but the logic for this uses
strstr which means that events with names which are the prefix
of another event, if disabled, could disable those events as
well.
Instead, we account for this possibility to prevent this
undesired behavior from occuring.
ASTERISK_29853
Change-Id: Icccd1872602889806740971e4adf932f92466959
Added functions to open, close, and apply XML Stylesheets
to XML documents. Although the presence of libxslt was already
being checked by configure, it was only happening if xmldoc was
enabled. Now it's checked regardless.
Added ability to parse a string consisting of comma separated
name/value pairs into an ast_variable list. The reverse of
ast_variable_list_join().
Change-Id: I1e1d149be22165a1fb8e88e2903a36bba1a6cf2e
Added the missing xml-stylesheet and Xinclude namespace
declarations in pjsip_config.xml and pjsip_manager.xml.
Updated make_xml_documentation to show detailed errors when
xmlstarlet is the validator. It's now run once with the '-q'
option to suppress harmless/expected messages and if it actually
fails, it's run again without '-q' but with '-e' to show
the actual errors.
Change-Id: I4bdc9d2ea6741e8d2e5eb82df60c68ccc59e1f5e
Added:
Replace a variable in a list:
int ast_variable_list_replace_variable(struct ast_variable **head,
struct ast_variable *old, struct ast_variable *new);
Added test as well.
Create a "name=value" string from a variable list:
'name1="val1",name2="val2"', etc.
struct ast_str *ast_variable_list_join(
const struct ast_variable *head, const char *item_separator,
const char *name_value_separator, const char *quote_char,
struct ast_str **str);
Added test as well.
Allow the name of an XML element to be changed.
void ast_xml_set_name(struct ast_xml_node *node, const char *name);
Change-Id: I330a5f63dc0c218e0d8dfc0745948d2812141ccb
Moved the xmldoc build logic from the top-level Makefile into
its own script "make_xml_documentation" in the build_tools
directory.
Created a new utility script "get_sourceable_makeopts", also in
the build_tools directory, that dumps the top-level "makeopts"
file in a format that can be "sourced" from shell sscripts.
This allows scripts to easily get the values of common make
build variables such as the location of the GREP, SED, AWK, etc.
utilities as well as the AST* and library *_LIB and *_INCLUDE
variables.
Besides moving logic out of the Makefile, some optimizations
were done like removing "third-party" from the list of
subdirectories to be searched for documentation and changing some
assignments from "=" to ":=" so they're only evaluated once.
The speed increase is noticeable.
The makeopts.in file was updated to include the paths to
REALPATH and DIRNAME. The ./conifgure script was setting them
but makeopts.in wasn't including them.
So...
With this change, you can now place documentation in any"c"
source file AND you can now place it in a separate XML file
altogether. The following are examples of valid locations:
res/res_pjsip.c
Using the existing /*** DOCUMENTATION ***/ fragment.
res/res_pjsip/pjsip_configuration.c
Using the existing /*** DOCUMENTATION ***/ fragment.
res/res_pjsip/pjsip_doc.xml
A fully-formed XML file. The "configInfo", "manager",
"managerEvent", etc. elements that would be in the "c"
file DOCUMENTATION fragment should be wrapped in proper
XML. Example for "somemodule.xml":
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE docs SYSTEM "appdocsxml.dtd">
<docs>
<configInfo>
...
</configInfo>
</docs>
It's the "appdocsxml.dtd" that tells make_xml_documentation
that this is a documentation XML file and not some other XML file.
It also allows many XML-capable editors to do formatting and
validation.
Other than the ".xml" suffix, the name of the file is not
significant.
As a start... This change also moves the documentation that was
in res_pjsip.c to 2 new XML files in res/res_pjsip:
pjsip_config.xml and pjsip_manager.xml. This cut the number of
lines in res_pjsip.c in half. :)
Change-Id: I486c16c0b5a44d7a8870008e10c941fb19b71ade
Recap from earlier commit: If you have a development branch for a
major project that will receive gerrit reviews it'll probably be
named something like "development/16/newproject" or a work branch
based on that "development" branch. That will necessitate
setting "defaultbranch=development/16/newproject" in .gitreview.
The make_version script uses that variable to construct the
asterisk version however, which results in versions
like "GIT-development/16/newproject-ee582a8c7b" which is probably
not what you want. It also constructs the URLs for downloading
external modules with that version, which will fail.
Fast-forward:
The earlier attempt at adding a "basebranch" variable to
.gitreview didn't work out too well in practice because changes
were made to .gitreview, which is a checked-in file. So, if
you wanted to rebase your work branch on the base branch, rebase
would attempt to overwrite your .gitreview with the one from
the base branch and complain about a conflict.
This is a slighltly different approach that adds three methods to
determine the mainline branch:
1. --- MAINLINE_BRANCH from the environment
If MAINLINE_BRANCH is already set in the environment, that will
be used. This is primarily for the Jenkins jobs.
2. --- .develvars
Instead of storing the basebranch in .gitreview, it can now be
stored in a non-checked-in ".develvars" file and keyed by the
current branch. So, if you were working on a branch named
"new-feature-work" based on "development/16/new-feature" and wanted
to push to that branch in Gerrit but wanted to pull the external
modules for 16, you'd create the following .develvars file:
[branch "new-feature-work"]
mainline-branch = 16
The .gitreview file would still look like:
[gerrit]
defaultbranch=development/16/new-feature
...which would cause any reviews pushed from "new-feature-work" to
go to the "development/16/new-feature" branch in Gerrit.
The key is that the .develvars file is NEVER checked in (it's been
added to .gitignore).
3. --- Well Known Development Branch
If you're actually working in a branch named like
"development/<mainline_branch>/some-feature", the mainline branch
will be parsed from it.
4. --- .gitreview
If none of the earlier conditions exist, the .gitreview
"defaultbranch" variable will be used just as before.
Change-Id: I1cdeeaa0944bba3f2e01d7a2039559d0c266f8c9
Adds the lastcontext and lastexten channel fields to allow users
to access previous dialplan execution locations.
ASTERISK-29840 #close
Change-Id: Ib455fe300cc8e9a127686896ee2d0bd11e900307
Although there are 10 debugs levels, over time,
many current debug calls have come to use
inappropriately low debug levels. In particular,
a select few debug calls (currently all debug 1)
can result in thousands of debug messages per minute
for a single call.
This can adds a lot of noise to core debug
which dilutes the value in having different
debug levels in the first place, as these
log messages are from the core internals are
are better suited for higher debug levels.
Some debugs levels are thus adjusted so that
debug level 1 is not inappropriately overloaded
with these extremely high-volume and general
debug messages.
ASTERISK-29897 #close
Change-Id: I55a71598993552d3d64a401a35ee99474770d4b4
pbx.digium.com no longer accepts IAX2 calls and
there are no plans for it to come back.
Accordingly, nonworking IAX2 URIs are removed from
both the LICENSE file and the sample config.
ASTERISK-29923 #close
Change-Id: I257c54d4d812ed6b4bd4cbec2cd7ebe2b87b5bad
Adds the since tag to the documentation DTD so
that individual applications, functions, etc.
can now specify when they were added to Asterisk.
This tag is added at the individual application,
function, etc. level as opposed to at the module
level because modules can expand over time as new
functionality is added, and granularity only
to the module level would generally not be useful.
This enables the ability to more easily determine
when new functionality was added to Asterisk, down
to minor version as opposed to just by major version.
This makes it easier for users to write more portable
dialplan if desired to not use functionality that may
not be widely available yet.
ASTERISK-29896 #close
Change-Id: Ibbb35c702d8038bdc3fd0a944fbfa69384cc15d5
Currently, each module that uses libcurl duplicates the standard
Asterisk curl user agent.
This adds a global macro for the Asterisk user agent used for
curl requests to eliminate this duplication.
ASTERISK-29861 #close
Change-Id: I9fc37935980384b4daf96ae54fa3c9adb962ed2d
Currently, if VoiceMailMain is called with a mailbox, if that
mailbox doesn't exist, then the application silently falls back
to prompting the user for the mailbox, as if no arguments were
provided.
However, if a specific mailbox is requested and it doesn't exist,
then no warning at all is emitted.
This fixes this behavior to now warn if a specifically
requested mailbox could not be accessed, before falling back to
prompting the user for the correct mailbox.
ASTERISK-29920 #close
Change-Id: Ib4093b88cd661a2cabc5d685777d4e2f0ebd20a4
If Subscription refresh occurred between when the batched notification
was scheduled and the serialized notification was to be sent,
then new schedule notification task would never be added.
There are 2 threads:
thread #1. ast_sip_subscription_notify is called,
if notification_batch_interval then call schedule_notification.
1.1. The schedule_notification checks notify_sched_id > -1
not true, then
send_scheduled_notify = 1
notify_sched_id =
ast_sched_add(sched, sub_tree->notification_batch_interval, sched_cb....
1.2. The sched_cb pushes task serialized_send_notify to serializer
and returns 0 which means no reschedule.
1.3. The serialized_send_notify checks send_scheduled_notify if it's false
the just returns. BUT notify_sched_id is still set, so no more ast_sched_add.
thread #2. pubsub_on_rx_refresh is called
2.1 it pushes serialized_pubsub_on_refresh_timeout to serializer
2.2. The serialized_pubsub_on_refresh_timeout calls pubsub_on_refresh_timeout
which calls send_notify
2.3. The send_notify set send_scheduled_notify = 0;
The serialized_send_notify should always unset notify_sched_id.
ASTERISK-29904 #close
Change-Id: Ifc50c00b213c396509e10326a1ed89d8cf8c7875
Whereas BLFs allow to show a display name for each RLS entry,
the asterisk provides only the extension now.
This is not end user friendly.
This commit adds a new resource_list option, resource_display_name,
to indicate whether display name of resource or the resource name being
provided for RLS entries.
If this option is enabled, the Display Name will be provided.
This option is disabled by default to remain the previous behavior.
If the 'event' set to 'presence' or 'dialog' the non-empty HINT name
will be set as the Display Name.
The 'message-summary' is not supported yet.
ASTERISK-29891 #close
Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681
Adds a simple sanity check for key names when users are
writing data to AstDB. This captures four cases indicating
malformed keynames that generally result in bad data going
into the DB that the user didn't intend: an empty key name,
a key name beginning or ending with a slash, and a key name
containing two slashes in a row. Generally, this is the
result of a variable being used in the key name being empty.
If a malformed key name is detected, a warning is emitted
to indicate the bug in the dialplan.
ASTERISK-29925 #close
Change-Id: Ifc08a9fe532a519b1b80caca1aafed7611d573bf
Adds two pieces of information to the core show settings command
which are useful in the context of getting backtraces.
The first is to display whether or not Asterisk would generate
a core dump if it were to crash.
The second is to show the current running directory of Asterisk.
ASTERISK-29866 #close
Change-Id: Ic42c0a9ecc233381aad274d86c62808d1ebb4d83
The configObject tag contains a default attribute which
allows the default value to be specified, if applicable.
This allows for the default value to show up specially on
the wiki in a way that is clear to users.
There are a couple places in the tree where default values
are included in the description as opposed to as attributes,
which means these can't be parsed specially for the wiki.
These are changed to use the attribute instead of being
included in the text description.
ASTERISK-29898 #close
Change-Id: I9d7ea08f50075f41459ea7b76654906b674ec755
mpg123 doesn't support HTTPS, but the MP3Player application
doesn't document this or warn the user about this. HTTPS
streams have become more common nowadays and users could
reasonably try to play them without being aware they should
use the HTTP stream instead.
This adds documentation to note this limitation. It also
throws a warning if users try to use the HTTPS stream to
tell them to use the HTTP stream instead.
ASTERISK-29900 #close
Change-Id: Ie3b029be5258c5a701f71ed3b1a7a80d1e03b827
Adds an option to the ReceiveMF application to allow specifying a
maximum number of digits.
Originally, this capability was not added to ReceiveMF as it was
with ReceiveSF because typically a ST digit is used to denote that
sending of digits is complete. However, there are certain signaling
protocols which simply transmit a digit (such as Expanded In-Band
Signaling) and for these, it's necessary to be able to read a
certain number of digits, as opposed to until receiving a ST digit.
This capability is added as an option, as opposed to as a parameter,
to remain compatible with existing usage (and not shift the
parameters).
ASTERISK-29877 #close
Change-Id: I4229167c9aa69b87402c3c2a9065bd8dfa973a0b
The disabledevents setting has been added to the general section
in manager.conf, which allows users to specify events that
should be globally disabled and not sent to any AMI listeners.
This allows for processing of these AMI events to end sooner and,
for frequent AMI events such as Newexten which users may not have
any need for, allows them to not be processed. Additionally, it also
cleans up core debug as previously when debug was 3 or higher,
the debug was constantly spammed by "Analyzing AMI event" messages
along with a complete dump of the event contents (often for Newexten).
ASTERISK-29853 #close
Change-Id: Id42b9a3722a1f460d745cad1ebc47c537fd4f205
When tps_shutdown is called as part of the cleanup process there is a
chance that one of the taskprocessors that references the
tps_singletons object is still running. The change is to allow for
tps_shutdown to check tps_singleton's container count and give the
running taskprocessors a chance to finish. If after
AST_TASKPROCESSOR_SHUTDOWN_MAX_WAIT (10) seconds there are still
container references we shutdown anyway as this is most likely a bug
due to a taskprocessor not being unreferenced.
ASTERISK-29365
Change-Id: Ia932fc003d316389b9c4fd15ad6594458c9727f1
There are a lot of Queue AMI actions and Queue applications
which do not load queue and queue members from Realtime.
AMI actions
QueuePause - if queue not in memory - response "Interface not found".
QueueStatus/QueueSummary - if queue not in memory - empty response.
Applications:
PauseQueueMember - if queue not in memory
Attempt to pause interface %s, not found
UnpauseQueueMember - if queue not in memory
Attempt to unpause interface xxxxx, not found
This patch adds a new function load_realtime_queues
which loads queue and queue members for desired queue
or all queues and all members if param 'queuename' is NULL or empty.
Calls the function load_realtime_queues when needed.
Also this patch fixes leak of ast_config in function set_member_value.
Also this patch fixes incorrect LOG_WARNING when pausing/unpausing
already paused/unpaused member.
The function ast_update_realtime returns 0 when no record modified.
So 0 is not an error to warn about.
ASTERISK-29873 #close
ASTERISK-18416 #close
ASTERISK-27597 #close
Change-Id: I554ee0eebde93bd8f49df7f84b74acb21edcb99c
This code was needlessly complex and would fail to properly delimit
the response message if LOW_MEMORY was defined.
Change-Id: Iae50bf09ef4bc34f9dc4b49435daa76f8b2c5b6e
added res_pjsip_outbound_registration to .requires in AST_MODULE_INFO
which fixes issue with module crashes on load "FRACK!, Failed assertion"
ASTERISK-29871
Change-Id: Ia0f49d048427a40e1b763296b834a52a03610096
The XML Manager Event Interface (amxml) now generates attribute names
that are compliant with the XML 1.1 specification. Previously, an
attribute name that started with a digit would be rendered as-is, even
though attribute names must not begin with a digit. We now prefix
attribute names that start with a digit with an underscore ('_') to
prevent XML validation failures.
This is not backwards compatible but my assumption is that compliant
XML parsers would already have been complaining about this.
ASTERISK-29886 #close
Change-Id: Icfaa56a131a082d803e9b7db5093806d455a0523
Added the following APIs:
pjsip_multipart_find_part_by_header()
pjsip_multipart_find_part_by_header_str()
pjsip_multipart_find_part_by_cid_str()
pjsip_multipart_find_part_by_cid_uri()
Change-Id: I6aee3dcf59eb171f93aae0f0564ff907262ef40d
If you have a development branch for a major project that
will receive gerrit reviews it'll probably be named something
like "development/16/newproject". That will necessitate setting
"defaultbranch=development/16/newproject" in .gitreview. The
make_version script uses that variable to construct the asterisk
version however, which results in versions like
"GIT-development/16/newproject-ee582a8c7b" which is probably not
what you want. Worse, since the download_externals script uses
make_version to construct the URL to download the binary codecs
or DPMA. Since it's expecting a simple numeric version, the
downloads will fail.
To get this to work, a new variable "basebranch" has been added
to .gitreview and make_version has been updated to use that instead
of defaultversion:
.gitreview:
defaultbranch=development/16/myproject
basebranch=16
Now git-review will send the reviews to the proper branch
(development/16/myproject) but the version will still be
constructed using the simple branch number (16).
If "basebranch" is missing from .gitreview, make_version will
fall back to using "defaultbranch".
Change-Id: I2941a3b21e668febeb6cfbc1a7bb51a67726fcc4
In dev mode, if you call pjsip_auth_clt_deinit() with an auth_sess
that hasn't been initialized, it'll assert and abort. If
digest_create_request_with_auth() fails to find the proper
auth object however, it jumps to its cleanup which does exactly
that. So now we no longer attempt to call pjsip_auth_clt_deinit()
if we never actually initialized it.
ASTERISK-29888
Change-Id: Ib6171c25c9fe8e61cc8d11129e324c021bc30b62
Adds a new option, defaultenabled, to the CDR core to
control whether or not CDR is enabled on a newly created
channel. This allows CDR to be disabled by default on
new channels and require the user to explicitly enable
CDR if desired. Existing behavior remains unchanged.
ASTERISK-29808 #close
Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1
Fixes some minor logic issues with the module:
Previously, the OPT_END_FILTER flag was getting
tested before options were parsed, so it could
never evaluate to true (wrong ordering).
Additionally, the initially parsed timeout (float)
needs to be compared with 0, not the result int
which is set afterwards (wrong variable).
ASTERISK-29857 #close
Change-Id: I0062bce3b391c15e5df7a714780eeaa96dd93d4c
In order to get around the issue of certain frames
having names that could overlap, func_frame_drop
surrounds names with commas for the purposes of
comparison.
The buffer is allocated and printed to properly,
but the original buffer is used for comparison.
In most cases, this wouldn't have had any effect,
but that was not the intention behind the buffer.
This updates the code to reference the modified
buffer instead.
ASTERISK-29854 #close
Change-Id: I430b52e14e712d0e62a23aa3b5644fe958b684a7
When generating dtmfs, asterisk can incorrectly think packet loss
occured during the dtmf generation, resulting in a jump in sequence
numbers when forwarding voice frames resumes. This patch forces
asterisk to re-learn the expected sequence number after each DTMF
to avoid this
ASTERISK-29869 #close
Change-Id: Icc7de3d947b207b82c99d3c327af8095884df853
Previously there was no way to specify a connection timeout when
attempting to connect a websocket client to a server. This patch
makes it possible to now do such.
Change-Id: I5812f6f28d3d13adbc246517f87af177fa20ee9d
autoconfigh.h.in was missed in the original review for this
issue. Additionally it looks like I have newer pkg-config autoconf
macros on my development machine.
ASTERISK-29817
Change-Id: I3c85a4de82c5d7d6e0e23dad4c33bb650a86a57b
sched: Avoid a double deref when AST_SCHED_DEL_UNREF is called on an
executing call-back. This is done by adding a new variable 'rescheduled'
to the struct sched which is set in ast_sched_runq and checked in
ast_sched_del_nonrunning. ast_sched_del_nonrunning is a replacement for
now deprecated ast_sched_del which returns a new possible value -2
if called on an executing call-back with rescheduled set. ast_sched_del
is modified to call ast_sched_del_nonrunning to maintain existing code.
AST_SCHED_DEL_UNREF is also updated to look for the -2 in which case it
will not throw a warning or invoke refcall.
test_sched: Add a new unit test sched_test_freebird that will check the
reference count in the resolved scenario.
ASTERISK-29698
Change-Id: Icfb16b3acbc29cf5b4cef74183f7531caaefe21d
if holdtime is (0 min, 0 sec) there is no hold time announcements
we should then also not playing queue-thankyou
ASTERISK-29831
Change-Id: Ic7e51dcde526b23f1cd8d24e1d1e2d81e10f9d2c
Fix the sed(1) invocation used to process git-svn-id not to use "\s"
that is a GNU-ism and is not supported by NetBSD sed. As a result,
this call did not work properly and make_version did output the full
git-svn-id line rather than the revision.
ASTERISK-29852
Change-Id: Ie4b406e2748920643446851a0a252a4ca7245772
Implement the ast_get_tid() function for NetBSD system. NetBSD supports
getting the TID via _lwp_self().
ASTERISK-29850
Change-Id: If57fd3f9ea15ef5d010bfbdcbbbae9b379f72f8c
Enable the Linux rdtsc implementation on NetBSD as well. The assembly
works correctly there.
ASTERISK-29851
Change-Id: I460ad9b4d971913420ecb84186f5ba5ab03f6f37
Fix the configure script not to detect the presence of gethostbyname_r()
on NetBSD incorrectly. NetBSD includes it as an internal libc symbol
that is not exposed in system headers and that is incompatible with
other implementations. In order to avoid misdetecting it, perform
the symbol check only if the declaration is found in the public header
first.
ASTERISK-29817
Change-Id: Iafa359b09908251bcd299ff54be003ea129b9eda
Remove the HMAC declarations from the includes. They are
not implemented nor used anywhere, and their presence breaks the build
on NetBSD that delivers an incompatible hmac() function in <stdlib.h>.
ASTERISK-29818
Change-Id: I0c4b88645e30174b1b63846a6b328625b69c2ea7
The code currently checks to see if an RFC3389
warning flag is set, except if it is, it merely
sets the flag again, the logic of which doesn't
make any sense.
This adjusts the if comparison to check if the
flag has NOT been set, and if so, emit a notice
log event and set the flag so that future frames
do not cause an event to be logged.
ASTERISK-29856 #close
Change-Id: Ib7098c947c63537d087a03b4646199fbb963f8e1
Reverted recent change that set '--with-external-srtp' instead
of '--without-external-srtp'. Since Asterisk handles all SRTP,
we don't need it enabled in pjproject at all.
ASTERISK-29867
Change-Id: I2ce1bdd30abd21c062eac8f8fefe9b898787b801
Neither pjsip_message_filter's filter_on_tx_message() nor
res_pjsip_session's session_outgoing_nat_hook() were multipart
aware and just assumed that an SDP would be the only thing in
a message body. Both were changed to use the new
pjsip_get_sdp_info() function which searches for an sdp in
both single- and multi- part message bodies.
ASTERISK-29813
Change-Id: I8f5b8cfdc27f1d4bd3e7491ea9090951a4525c56
The change to allow easier hacking on bundled pjproject created
a few issues:
* The new Makefile was trying to run the bundled make even if
PJPROJECT_BUNDLED=no. third-party/Makefile now checks for
PJPROJECT_BUNDLED and JANSSON_BUNDLED and skips them if they
are "no".
* When building with bundled, config_site.h was being copied
only if a full make or a "make main" was done. A "make res"
would fail all the pjsip modules because they couldn't find
config_site.h. The Makefile now copies config_site.h and
asterisk_malloc_debug.h into the pjproject source tree
when it's "configure" is performed. This is how it used
to be before the big change.
ASTERISK-29858
Change-Id: I9427264fa3cb8b3f59a95e5f9693eac236a6f76d
Added two new functions to assist checking media types...
* ast_sip_are_media_types_equal compares two pjsip_media_types.
* ast_sip_is_media_type_in tests if one media type is in a list
of others.
Added static definitions for commonly used media types to
res_pjsip.h.
Changed several modules to use the new functions and static
definitions.
ASTERISK_29813
(not ready to close)
Change-Id: Ief77675235bd3bf00a6b095d4673fd878d0801b9
pjsip_msg_find_hdr(), pjsip_msg_find_hdr_by_name(), and
pjsip_msg_find_hdr_by_names() require a pjsip_msg to be passed in
so if you need to search a header list that's not in a pjsip_msg,
you have to do it yourself. This commit adds generic versions of
those 3 functions that take in the actual header list head instead
of a pjsip_msg so if you need to search a list of headers in
something like a pjsip_multipart_part, you can do so easily.
Change-Id: I6f2c127170eafda48e5e0d5d4d187bcd52b4df07
A regression was introduced in ASTERISK~29531 that caused 'say'
functions to fail with file lists that would previously have
succeeded. This caused affected channels to hang up where previously
they would have continued.
We now explicitly check for the empty string to restore the previous
behavior.
ASTERISK-29859 #close
Change-Id: Ia2e5769868e2792313c2d7c07996efe009c6f8d5
Documentation for built-in special system and channel
vars is currently outdated, and updating is a manual
process since there is no XML documentation for these
anywhere.
This adds documentation for system vars to func_env
and for channel vars to func_channel so that they
appear along with the corresponding fields that would
be accessed using a function.
ASTERISK-29848 #close
Change-Id: I6997f925c4a45fffe71321861f5898a8b7182fa9
Every config variable in the directories
section of asterisk.conf currently has a
counterpart built-in variable containing
the value of the config option, except
for the last one, astsbindir, which should
have an ASTSBINDIR variable.
However, the actual corresponding ASTSBINDIR
variable is missing in pbx_variables.c.
This adds the missing variable so that all
the config options have their corresponding
variable.
ASTERISK-29847 #close
Change-Id: I36006faf471825b36ebc8aa5e87a3bcb38d446fc
There are times when you need to troubleshoot issues with bundled
pjproject or add new features that need to be pushed upstream
but...
* The source directory created by extracting the pjproject tarball
is not scanned for code changes so you have to keep forcing
rebuilds.
* The source directory isn't a git repo so you can't easily create
patches, do git bisects, etc.
* Accidentally doing a make distclean will ruin your day by wiping
out the source directory, and your changes.
* etc.
This commit makes that easier.
See third-party/pjproject/README-hacking.md for the details.
ASTERISK-29824
Change-Id: Idb1251040affdab31d27cd272dda68676da9b268
gethostbyname() and gethostbyname_r() are deprecated in favor of
getaddrinfo() which we use in the ast_sockaddr family of functions.
ASTERISK-29819 #close
Change-Id: Ie277c0ef768d753b169c121ef570a71665692ab7
Fixes 12pm noon incorrectly returning 0/a.m.
Also fixes a misspelling typo in the config.
ASTERISK-29695 #close
Change-Id: Ie40f9618636eb4c483b449bd707a5dcffca5c406
adding support for playing the correct en/et for nordic languages
by adding 'n' for neuter gender in the relevant ast_say_number
ASTERISK-29827
Change-Id: I03ebc827d2f0dc95132ab2f42799893c70edc5b1
Adds the macro DTMF_MATRIX_SIZE to replace
the magic number 4 sprinkled throughout
dsp.c.
ASTERISK-29815 #close
Change-Id: Ie3bddb92c6b16204ece0f758009e9490eb33b9ba
Adds a command to the CLI to unload and then
load a module. This makes it easier to perform
these operations which are often done
subsequently to load a new version of a module.
"module reload" already refers to reloading of
configuration, so the name "refresh" is chosen
instead.
ASTERISK-29807 #close
Change-Id: I595f6f11774a0de2565a1fba38da22309ce93a2c
Currently, the MP3Player application doesn't
emit a warning if attempting to play a stream
which no longer exists. This can be a common
scenario as many mp3 streams are valid at some
point but can disappear at any time.
Now a warning is thrown if attempting to play
a nonexistent MP3 stream, instead of silently
exiting.
ASTERISK-29829 #close
Change-Id: I53a0bf1ed1740166655eb66fe7675f6f808bf535
Adds missing documentation for some channel,
bridge, and queue events.
ASTERISK-24427
ASTERISK-29515
Change-Id: I92b06b88c8cadc0155f95ebe3e870b3e795a8c64
The current TCP client connect code, blocks and does not handle EINTR
error case.
This patch makes the client socket non-blocking while connecting,
ensures a connect does not immediately fail due to EINTR "errors",
and adds a connect timeout option.
The original client start call sets the new timeout option to
"infinite", thus making sure old, orginal behavior is retained.
ASTERISK-29746 #close
Change-Id: I907571843a83e43c0742b95a64785f4411f02671
Adds tech-agnostic support for SF signaling
by adding SF sender and receiver applications
as well as Dial integration.
ASTERISK-29802 #close
Change-Id: I7ec50752e9a661af639425e5d1e339f17411bcad
A previous patch for ASTERISK_29578 caused a 'leak' of
extension state information across queues, causing the
state of the first member of unrelated queues to be
updated in addition to the correct member. Which queues
and members depended on the order of queues in the
iterator.
Additionally, it is possible to use the same 'hint:' on
multiple queue members, so the update cannot break out
of the update loop early when a match is found.
ASTERISK-29806 #close
Change-Id: If2c1d1cc2a752afd9286d79710fc818596e7a7ad
SayAlpha, SayAlphaCase, SayDigits, SayMoney, SayNumber, SayOrdinal,
and SayPhonetic all claim to allow DTMF interruption if the
SAY_DTMF_INTERRUPT channel variable is set to a truthy value, but we
are failing to break out of a given 'say' application if DTMF actually
occurs.
ASTERISK-29816 #close
Change-Id: I6a96e0130560831d2cb45164919862b9bcb6287e
The ast_rtp_codecs_payloads functions do not preserve the order in which
the payloads were specified on an incoming SDP media line. This leads to
a problem with the codec negotiation functionality, as the format
capabilities of the stream are extracted from the ast_rtp_codecs. This
commit moves the ast_rtp_codec to ast_format conversion to the place
where the order is still known.
ASTERISK-28863
ASTERISK-29320
Change-Id: I3aabcfed3f379c36654f59c1872c313d0cb57e25
It's not safe to keep the channel locked while locking
the peer Local channel, as it can result in a deadlock.
This change unlocks it during this time but keeps the
bridge locked to ensure nothing changes about the bridge.
ASTERISK-29821
Change-Id: Ib68eb7037e5a479bcc2aceee77337cdde1fbdde6
When test_timezone_watch runs very near a DST transition,
two time zones that would otherwise be expected to report the same
time can differ because of the DST transition.
Instead of having the test fail when this happens, report the
times, time zones, and dst flags.
ASTERISK-29722
Change-Id: Id59bdac8b277e14343ccdf0c99b89e92f79f316a
Adding upstream patch for pull request...
https://github.com/pjsip/pjproject/pull/2920
---------------------------------------------------------------
sip_inv: Additional multipart support (#2919)
sip_inv.c:inv_check_sdp_in_incoming_msg() deals with multipart
message bodies in rdata correctly. In the case where early media is
involved though, the existing sdp has to be retrieved from the last
tdata sent in this transaction. This, however, always assumes that
the sdp sent is in a non-multipart body. While there's a function
to retrieve the sdp from multipart and non-multpart rdata bodies,
no similar function for tdata exists. So...
* The existing pjsip_rdata_get_sdp_info2 was refactored to
find the sdp in any body, multipart or non-multipart, and
from either an rdata or tdata. The new function is
pjsip_get_sdp_info. This new function detects whether the
pjsip_msg->body->data is the text representation of the sdp
from an rdata or an existing pjmedia_sdp_session object
from a tdata, or whether pjsip_msg->body is a multipart
body containing either of the two sdp formats.
* The exsting pjsip_rdata_get_sdp_info and pjsip_rdata_get_sdp_info2
functions are now wrappers that get the body and Content-Type
header from the rdata and call pjsip_get_sdp_info.
* Two new wrappers named pjsip_tdata_get_sdp_info and
pjsip_tdata_get_sdp_info2 have been created that get the body
from the tdata and call pjsip_get_sdp_info.
* inv_offer_answer_test.c was updated to test multipart scenarios.
ASTERISK-29804
Change-Id: I483c7c3d413280c9e247a96ad581278347f9c71b
When OUTPUTDIR is set to another directory and the
--delete-results-after is set, the resulting txt files are
not deleted.
ASTERISK-29794 #close
Change-Id: I1c0071f6809a1e3f5cfc455d6eb08378bc0d7286
The variable cp4 in a variable substitution function
can potentially be used without being initialized
currently. This causes Asterisk to no longer compile.
This initializes cp4 to NULL to make the compiler
happy.
ASTERISK-29803 #close
Change-Id: I392579cbb76db2795d5820c9427cf55fbcee9e72
added that we set DIALEDPEERNUMBER on the outgoing channels
so it is avalible in b(content^extension^line)
this add the same behaviour as Dial
ASTERISK-29795
Change-Id: Icbc589ea2066f0c401a892bf478f6b2fd44e62f6
Previously, it was only possible to have one HTTP server in Asterisk.
With this patch it is now possible to have multiple HTTP servers
listening on different addresses.
Note, this behavior has only been made available through an API call
from within the TEST_FRAMEWORK. Specifically, this feature has been
added in order to allow unit test to create/start and stop servers,
if one has not been enabled through configuration.
Change-Id: Ic5fb5f11e62c019a1c51310f4667b32a4dae52f5
Currently, Asterisk doesn't throw warnings if options
are passed into applications that don't accept them.
This can confuse users if they're unaware that they
are doing something wrong.
This adds an additional check to parse_options so that
a warning is thrown anytime an option is parsed that
doesn't exist in the parsing application, so that users
are notified of the invalid usage.
ASTERISK-29801 #close
Change-Id: Id029274a57135caca193c913307a63fd75e24679
added support for playing the correct plural sound file
dependen on where you have 1 or multipe messages
based on the existing SE/NO code
ASTERISK-29797
Change-Id: I88aa814d02f3772bb80b474204b1ffb26fe438c2
Adds a ReceiveText application that can be used in
conjunction with SendText. Currently, there is no
way in Asterisk to receive text in the dialplan
(or anywhere else, really). This allows for Asterisk
to be the recipient of text instead of just the sender.
ASTERISK-29759 #close
Change-Id: Ica2c354a42bff69f323a0493d3a7cd0fb129d52d
The enum values for ast_strsep_flags includes
AST_STRSEP_STRIP. However, some comments reference
AST_SEP_STRIP, which doesn't exist. This fixes
these comments to use the correct value.
ASTERISK-29800 #close
Change-Id: If7bbd0c0e6226a211d25ddf9d1629347e2674943
Currently MSet can only parse a maximum of 24 variables.
If more variables are provided to MSet, the 24th variable
will simply contain the remainder of the string and the
remaining variables thereafter will never get set.
This increases the number of variables that can be parsed
in one go from 24 to 99. Additionally, documentation is added
since this limitation is currently undocumented and is
confusing to users who encounter this limitation.
ASTERISK-29766 #close
Change-Id: I3fe35b462dedec0a452fd9ea7f92c920a3939f16
Attempting to access ${CHANNEL(ruri)} in a pre-dial handler before
initiating an outgoing call will cause Asterisk to crash. This is
because a null field is accessed, resulting in an offset from null and
subsequent memory access violation.
Since RURI is not guaranteed to exist, we now check if the base
pointer is non-null before calculating an offset.
ASTERISK-29772
Change-Id: Icd3b02f07256bbe6615854af5717074087b95a83
Adds the JSON_DECODE function for parsing JSON in the
dialplan. JSON parsing already exists in the Asterisk
core and is used for many different things. This
function exposes the basic parsing capability to
the user in the dialplan, for instance, in conjunction
with CURL for using API responses.
ASTERISK-29706 #close
Change-Id: Iea60c49a7358dfdc2db60803cdc9a742f808ba2c
Includes some minor updates to extensions.conf
and iax.conf. In particular, the demonstration
of macros in extensions.conf is removed, as
Macro is deprecated and will be removed soon.
These examples have been replaced with examples
demonstrating the usage of Gosub instead.
The older exten => ...,n syntax is also mostly
replaced with the same keyword to demonstrate the
newer, more concise way of defining extensions.
IAXTEL no longer exists, so this example is replaced
with something more generic.
Some documentation is also added to extensions.conf
and iax.conf to clarify some of the new expanded
encryption capabilities with IAX2.
ASTERISK-29758 #close
Change-Id: I04fba9671aa1ee9ba1bd5027061f80bbe38e7b46
Currently, variable substitution involving dialplan
extensions is quite clunky since it entails obtaining
the current dialplan location, backing it up, storing
the desired variables for substitution on the channel,
performing substitution, then restoring the original
location.
In addition to being clunky, things could also go wrong
if an async goto were to occur and change the dialplan
location during a substitution.
Fundamentally, there's no reason it needs to be done this
way, so new API is added to allow for directly passing in
the dialplan location for the purposes of variable
substitution so we don't need to mess with the channel
information anymore. Existing API is not changed.
ASTERISK-29745 #close
Change-Id: I23273bf27fa0efb64a606eebf9aa8e2f41a065e4
Adds tech-agnostic support for MF signaling by adding
MF sender and receiver applications as well as Dial
integration.
ASTERISK-29496-mf #do-not-close
Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4
Otherwise, the value 'false' was not found in the enumerated set of
the XML DTD for the XML attribute 'required' in the XML element
'parameter'. Therefore, DTD validation of the runtime XML failed.
ASTERISK-29790
Change-Id: Id13f230ad65a70dd8c2e3ae9ac85d1e841aed03e
In developer mode, use internal documentation as well.
This should produce no warnings. Fix yours!
In noisy mode, output all possible warnings of Doxygen.
This creates zillion of warnings. Double-check your current module!
Any warnings are in the file './doxygen.log'. Beside that, this change
avoids deprecated parameters because the configuration file for Doxygen
contains only those parameters which differ from the default. This
avoids the need to update the file on each run. Furthermore, it adds
AST_VECTOR to be expanded. Finally, the default name for that file is
Doxyfile. Therefore, let us use that!
ASTERISK-26991
ASTERISK-20259
Change-Id: I4129092a199d5e24c319a09cd088614b121015af
We know that passing a NULL or empty argument to
ast_channel_get_by_name() will never result in a matching channel and
will always result in an error being emitted, so just short-circuit
out in that case.
ASTERISK-28219 #close
Change-Id: I88eadc748e9c6996fc17467b0a05881bbfd00bce
res/res_rtp_asterisk.c: Adding 1 to rtpstart if it is deteremined
that rtpstart was configured to be an odd value. Also adding a loop
counter to prevent a possible infinite loop when looking for a free
port.
ASTERISK-27406
Change-Id: I90f07deef0716da4a30206e9f849458b2dbe346b
changed that when we recive a CANCEL that we set HANGUPCAUSE to AST_CAUSE_NORMAL_CLEARING
ASTERISK-28053
Reported by: roadkill
Change-Id: Ib653aec2282f55b59d87484391cc07c8e6612b89
Newer versions of spandsp did refactoring of code to add new features
like color FAXing. This refactoring broke backwards compatibility.
Add support for the new version while retaining support for 0.0.6.
ASTERISK-29729 #close
Change-Id: I3bd74550604ebcf0304528d647fa39abc62fbaa1
Since Doxygen 1.8.16, a special comment block is required. Otherwise
(pure C comment), the group command is ignored. Additionally, several
unbalanced group commands were fixed.
ASTERISK-29732
Change-Id: I4687857b9d56e6f44fd440b73af156691660202e
Most examples in the XML documentation use the
example tag to demonstrate examples, which gets
parsed specially in the Wiki to make it easier
to follow for users.
This fixes a few modules to use the example
tag instead of vanilla para tags to bring them
in line with the standard syntax.
ASTERISK-29777 #close
Change-Id: I9acb6cc5faf1d220e73c6dd28592371d768d279b
A backend's implementation of the realtime 'require' function may call
va_arg() and then fail, leaving the va_list in an undefined
state. Pass a copy of the va_list instead.
ASTERISK-29771 #close
Change-Id: I555565a72af84e96d49f62fe8cb66ba5a78461f4
Refactors generic functions used for email generation
into utils.c so that they can be used by multiple
modules, including app_voicemail and app_minivm,
to avoid code duplication.
ASTERISK-29715 #close
Change-Id: I1de0ed3483623e9599711129edc817c45ad237ee
This avoids a few long-name overflows, at the cost of less instructive
names in the case of C++ (specifically overloaded functions and class
methods). This in turn is offset against the fact that we're logging
the filename and line numbers in any case.
Change-Id: I54101a0bb5f8cb9ef63ec12c5e0d4c8edafff9ed
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
In the AO2_ALLOC_OPT_LOCK_NOLOCK case the referenced obj
structure is freed, but is then referenced later if ref_log is
enabled. The change is to store the obj->priv_data.options value
locally and reference it instead of the value from the freed obj
ASTERISK-29730
Change-Id: I60cc5dc1f5a4330e7ad56976fc38a42de0ab6072
Local channels are made up of two pairs - the 1 and 2
sides. When a frame goes in one side, it comes out the
other. Back and forth. When both halves are in a
bridge this creates an infinite loop of frames.
This change makes it so that bridging no longer
allows both of these sides to exist in the same
bridge.
ASTERISK-29748
Change-Id: I29928b6de87cd9be996a77daccefd7c360fef651
Makes basic call progress tone detection available
in a tech-agnostic manner with the addition of the
ToneScan application. This can determine if the channel
has encountered a busy signal, SIT tones, dial tone,
modem, fax machine, etc. A few basic async progress
tone detect options are also added to the TONE_DETECT
function.
ASTERISK-29720 #close
Change-Id: Ia02437e0450473031e294798b8cb421fb8f24e90
Furthermore, consistently use not 'No' but ':' for non-existent file
paths. Finally, use the same pattern for checking file paths:
a) = ":"
b) != "x:"
Change-Id: I0c80c76d2cc98b0e5c859131290f4e3141a1a544
Fixes four misuses of the parameter 'name'. Additionally, for
consistency and to avoid such an issue in future, those few other
places, which used '\file name', were changed just to '\file'. Then,
Doxygen uses the name of the current file.
ASTERISK-29733
Change-Id: I0c18b4c863c6988b138c77448057349a9ee7052d
Fixes a deadlock in app_morsecode caused by locking
the channel twice when reading variables from the
channel. The duplicate lock is simply removed.
ASTERISK-29744 #close
Change-Id: I204000701f123361d7f85e0498fedc90243c75e4
Currently, when the t option is specified with no arguments,
the # character is still treated as a terminator, even though
no character should be treated as a terminator.
This is because a previous regression fix was modified to
remove the use of NULL as a default altogether. However,
NULL and an empty string actually refer to different
arrangements and should be treated differently. NULL is the
default terminator (#), while an empty string removes the
terminator altogether. This is the behavior being used by
the rest of the core.
Additionally, since S_OR catches empty strings as well as
NULL (not intended), this is changed to a ternary operator
instead, which fixes the behavior.
ASTERISK-29705 #close
Change-Id: I9b6b72196dd04f5b1e0ab5aa1b0adf627725e086
Fix parsing of ANI2/OLI information, since it was previously
parsing the user, when it should have been parsing other_param.
Also improves the parsing by using pjproject native functions
rather than trying to parse the parameters ourselves like
chan_sip did. A previous attempt at this caused a crash, but
this works correctly now.
ASTERISK-29703 #close
Change-Id: I8f3c79032d9ea1a21d16f8e11f22bd8d887738a1
Correct typos of the following word families:
standard
increase
comments
valgrind
promiscuous
editing
libtonezone
storage
aggressive
whitespace
russellbryant
consecutive
peternixon
ASTERISK-29714
Change-Id: I9cafbf41b579c9c0c84c81719d2c4f900beec245
Correct typos of the following word families:
voiced
denumerator
codeword
upsampling
constructed
residual
subroutine
conditional
quantizing
courtesy
number
ASTERISK-29714
Change-Id: I471fb8086a5277d8f05047fedee22cfa97a4252d
Correct typos of the following word families:
password
excludes
undesirable
checksums
through
screening
interpreting
database
causes
initiation
member
busydetect
defined
severely
throughput
recognized
counter
require
indefinitely
accounts
ASTERISK-29714
Change-Id: Ie8f2a7b274a162dd627ee6a2165f5e8a3876527e
Correct typos of the following word families:
dependency
unless
random
dependencies
delimited
randomly
modules
ASTERISK-29714
Change-Id: I3920603a8dc7c0a1852d2f885e06b1144692d40e
Correct typos of the following word families:
multiplication
potentially
iteration
interaction
virtual
synthesis
convolve
initializes
overlap
ASTERISK-29714
Change-Id: Ia40f1aca8f2996ab407c6ed9d24cb10a67c6684b
Correct typos of the following word families:
mounting
jitterbuffer
thrashing
original
manipulating
entries
actual
possibility
tasks
options
positives
taskprocessor
other
dynamic
declarative
ASTERISK-29714
Change-Id: I6b94659d045eec5d8d020fce2e9b6e2f593dfeb6
Correct typos of the following word families:
process
populate
with
africa
accessing
contexts
exercise
university
organizations
withhold
maintaining
independent
rotation
ignore
eventname
ASTERISK-29714
Change-Id: I90eacc5bc3dcf75a9c898cfb85164f37dec08345
Correct typos of the following word families:
command-line
immediately
extensions
momentarily
mustn't
numbered
bytes
caching
ASTERISK-29714
Change-Id: I8b2b125c5d4d2f9e87a58515c97468ad47ca44f8
When reloading dialplan, hints created dynamically would lose any dash
characters. Now we ignore those dashes if we are dealing with a hint
during a reload.
ASTERISK-28040 #close
Change-Id: I95e48f5a268efa3c6840ab69798525d3dce91636
Fixes compiler warning caused by a truncated copy of the ANI2 into a
buffer of size 10. This could prevent the null terminator from being
copied if the copy value exceeds the size of the buffer. This increases
the buffer size to 101 to ensure there is no way for truncation to occur.
ASTERISK-29702 #close
Change-Id: Ief9052212952840fa44de6463b8699fdb3e163d0
If users are able to press # for options while leaving
a message and then press 3 to rerecord the message, if
the caller hangs up during the rerecord prompt but before
Asterisk starts recording a message, then an "empty"
voicemail gets processed whereby an email gets sent out
notifying the user of a 0:00 duration message. The file
doesn't actually exist, so playback will fail since there
was no message to begin with.
This adds a check after the streaming of the rerecord
announcement to see if the caller has hung up. If so,
we bail out early so that we can clean up properly.
ASTERISK-29391 #close
Change-Id: Id965d72759a2fd3b39afb76fec08aaebebe75c31
Historically, the dial syntax for IAX2 has held that
an outkey (used only for RSA authenticated calls)
and a secret (used only for plain text and MD5 authenticated
calls, historically) were mutually exclusive, and thus
the same position in the dial string was used for both
values.
Now that encryption is possible with RSA authentication,
this poses a limitation, since encryption requires a
secret and RSA authentication requires an outkey. Thus,
the dial syntax is extended so that both a secret and
an outkey can be specified.
The new extended syntax is backwards compatible with the
old syntax. However, a secret can now be specified after
the outkey, or the outkey can be specified after the secret.
This makes it possible to spawn an encrypted RSA authenticated
call without a corresponding peer being predefined in iax.conf.
ASTERISK-29707 #close
Change-Id: I1f8149313ed760169d604afbb07720a8b07dd00e
* Initialize some variables that are never used anyway.
* Use valid pointers instead of integers cast to void pointers when
calling pthread_setspecific().
ASTERISK-29711 #close
ASTERISK-29713 #close
Change-Id: I8728cd6f2f4b28e0e48113c5da450b768c2a6683
The search for a running asterisk when --running is used
has been greatly simplified and in the event it doesn't
work, you can now specify a pid to use on the command
line with --pid.
The search for asterisk modules when --tarball-coredumps
is used has been enhanced to have a better chance of finding
them and in the event it doesn't work, you can now specify
--libdir on the command line to indicate the library directory
where they were installed.
The DATEFORMAT variable was renamed to DATEOPTS and is now
passed to the 'date' utility rather than running DATEFORMAT
as a command.
The coredump and output files are now renamed with DATEOPTS.
This can be disabled by specifying --no-rename.
Several confusing and conflicting options were removed:
--append-coredumps
--conffile
--no-default-search
--tarball-uniqueid
The script was re-structured to make it easier for follow.
Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59
Add a function to check if there is an exact match a one string between
delimiters in another string.
Add a function that will create an ast_json object out of a list of
Asterisk variables. An excludes string can also optionally be passed
in.
Also, add a macro to make it easier to get object integers.
Change-Id: I5f34f18e102126aef3997f19a553a266d70d6226
The stir_shaken configuration option now has 4 different choices to pick
from: off, attest, verify, and on. Off and on behave the same way they
do now. Attest will only perform attestation on the endpoint, and verify
will only perform verification on the endpoint.
Certain responses are required to be sent based on certain conditions
for STIR/SHAKEN. For example, if we get a Date header that is outside of
the time range that is considered valid, a 403 Stale Date response
should be sent. This and several other responses have been added.
Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7
Add a time_t logintime to storage a time when a member is added into a
queue.
Also, includes show this time (in seconds) using a 'queue show' command
and the field LoginTime for response for AMI events.
ASTERISK-18069 #close
Change-Id: Ied6c3a300f78d78eebedeb3e16a1520fc3fff190
Add a new function that converts a speech results type to a string.
Also add another function to unregister an engine, but returns a
pointer to the unregistered engine object instead of a success/fail
integer.
Change-Id: I0f7de17cb411021c09fb03988bc2b904e1380192
test_voicemail_api: Use empty char* for empty_msg_ids.
chan_skinny: Fix size of calledParty to be maximum extension.
menuselect: Change Makefile to stop deprecated warnings. Added comments
test_linkedlist: 'bogus' variable was manually allocated from a macro
and the test fails if this happens but the compiler couldn't 'see' this
and returns a warning. memset to all 0's after allocation.
chan_ooh323: Fixed various indentation issues that triggered misleading
indentation warnings.
ASTERISK-29682
Reported by: George Joseph
Change-Id: If4fe42222c8444dc16828a42731ee53b4ce5cbbe
I am adding a mix option that will play by filename and say.conf unlike
say option that will only play with say.conf. It
will look on the format of the name, if it is like say it play with
say.conf if not it will play the file name.
ASTERISK-29662
Change-Id: I815816916a308f0fa8f165140dc15772dcbd547a
OpenSSL is one of those packages that often have alternatives
with later versions. For instance, CentOS/EL 7 has an
openssl package at version 1.0.2 but there's an openssl11
package from the epel repository that has 1.1.1. This gets
installed to /usr/include/openssl11 and /usr/lib64/openssl11.
Unfortunately, the existing --with-ssl and --with-crypto
./configure options expect to point to a source tree and
don't work in this situation. Also unfortunately, the
checks in ./configure don't use pkg-config.
In order to make this work with the existing situation, you'd
have to run...
./configure --with-ssl=/usr/lib64/openssl11 \
--with-crypto=/usr/lib64/openssl11 \
CFLAGS=-I/usr/include/openssl11
BUT... those options don't get passed down to bundled pjproject
so when you run make, you have to include the CFLAGS again
which is a big pain.
Oh... To make matters worse, although you can specify
PJPROJECT_CONFIGURE_OPTS on the ./configure command line,
they don't get saved so if you do a make clean, which will
force a re-configure of bundled pjproject, those options
don't get used.
So...
* In configure.ac... Since pkg-config is installed by install_prereq
anyway, we now use it to check for the system openssl >= 1.1.0.
If that works, great. If not, we check for the openssl11
package. If that works, great. If not, we fall back to just
checking for any openssl. If pkg-config isn't installed for some
reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified
on the ./configure command line, we fall back to the existing
logic that uses AST_EXT_LIB_CHECK().
* The whole OpenSSL check process has been moved up before
THIRD_PARTY_CONFIGURE(), which does the initial pjproject
bundled configure, is run. This way the results of the above
checks, which may result in new include or library directories,
is included.
* Although not strictly needed for openssl, We now save the value of
PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used
again if a re-configure is triggered.
ASTERISK-29693
Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde
There are 3 separate changes here:
1. The documentation erroneously stated that the dsp_talking_threshold
argument was a number of milliseconds when it is actually an energy
level used by the DSP code to classify talking vs. silence.
2. Fixes a copy paste error in the argument handling code.
3. Don't erroneously switch to the talking state if we aren't actively
handling a frame we've classified as talking.
Patch inspired by one provided by Moritz Fain (License #6961).
ASTERISK-27816 #close
Change-Id: I5953fd570b98b49c41cee55bfe3b941753fb2511
Discovered while looking at ASTERISK~29684. Usage was removed in change
I3c77c7b00b2ffa2e935632097fa057b9fdf480c0.
Change-Id: Iaf2f7a16ea5a7eee6375319347e4b40b8e7b10e3
download_externals: Add check for i686 and i386 (in addition
to the current x86_64) and exit if not one of the three.
ASTERISK-26497
Change-Id: Ia4d429fcefa5b2f5b6e99159d4607de8e8325b2f
Some ast_stun_request users do not provide a destination address when
sending to a connection-mode socket.
ASTERISK-29691
Change-Id: Idd9114c3380216ba48abfc3c68619e79ad37defc
If you aren't using GNU coreutils, chances are that your basename
doesn't know about the -s argument. Luckily for us, basename does what
we need it do even without the -s argument.
Change-Id: I8b81a429bb037b997ee6640ff8a2b5e860962bb7
Adds support for encryption to RSA-authenticated
calls. Also prevents crashes if an RSA IAX2 call
is initiated to a switch requiring encryption
but no secret is provided.
ASTERISK-20219
Change-Id: I18f1f9d7c59b4f9cffa00f3b94a4c875846efd40
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
If the terminator character is not explicitly specified
and an indications tone is used for reading a digit,
there is no null pointer check so Asterisk crashes.
This prevents null usage from occuring.
ASTERISK-29673 #close
Change-Id: Ie941833e123c3dbfb88371b5de5edbbe065514ac
The current versions do not support future dates in all say application when using the 'Q' or 'q' format parameter and says "today" for everything that is greater than today
ASTERISK-29637
Change-Id: I1fb1cef0ce3c18d87b1fc94ea309d13bc344af02
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
When listing bridges we go through the ones present in
ARI, get their snapshot, turn it into JSON, and add it
to the payload we ultimately return.
An invisible "dial bridge" exists within ARI that would
also try to be added to this payload if the channel
"create" and "dial" routes were used. This would ultimately
fail due to invisible bridges having no snapshot
resulting in the listing of bridges failing.
This change makes it so that the listing of bridges
ignores invisible ones.
ASTERISK-29668
Change-Id: I14fa4b589b4657d1c2a5226b0f527f45a0cd370a
The MessageSend AMI action has been updated to allow the Destination
and the To addresses to be provided separately. This brings the
MessageSend manager command in line with the capabilities of the
MessageSend dialplan application.
ASTERISK-29663 #close
Change-Id: I8513168d3e189a9fed88aaab6f5547ccb50d332c
Adds a function to check for the existence of a channel by
name or by UNIQUEID.
ASTERISK-29656 #close
Change-Id: Ib464e9eb6e13dc683a846286798fecff4fd943cb
Previously, if custom hints were used with the hint:
format in app_queue, when device state changes occured,
app_queue would only do a literal string comparison of
the context used for the hint in app_queue and the context
of the hint which just changed state. This caused hints
to not update and become stale if the context associated
with the agent included the context which actually changes
state, essentially completely breaking device state for
any such agents defined in this manner.
This fix adds an additional check to ensure that included
contexts are also compared against the context which changed
state, so that the behavior is correct no matter whether the
context is specified to app_queue directly or indirectly.
ASTERISK-29578 #close
Change-Id: I8caf2f8da8157ef3d9ea71a8568c1eec95592b78
Rather than stripping parameters from Content-Type headers before
comparison, first try to compare the whole string. If no match is
found, strip the parameters and try that way.
ASTERISK-29275 #close
Change-Id: I2963c8ecbb3a9605b78b6421c415108d77a66a0f
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
Some code has been added referencing symbols defined in a block
protected by #ifdef HAVE_PJPROJECT. Protect those code parts in
ifdef blocks too.
ASTERISK-29660
Change-Id: Ib18d4392d51ac80ca5481dabf6e498a4e3e49e6f
An issue was found where a particular manufacturer's phones add a
trailing space to the end of the rtpmap attribute when specifying
a payload type that has a "param" after the format name and clock
rate. For example:
a=rtpmap:120 opus/48000/2 \r\n
Because pjmedia_sdp_attr_get_rtpmap currently takes everything after
the second '/' up to the line end as the param, the space is
included in future comparisons, which then fail if the param being
compared to doesn't also have the space.
We now use pj_scan_get() to parse the param part of rtpmap so
trailing whitespace is automatically stripped.
ASTERISK-29654
Change-Id: Ibd0a4e243a69cde7ba9312275b13ab62ab86bc1b
In new mpg123 versions (since 1.26) the default output is 32 bits
Asterisk expects the output in 16 bits, so we force the output to be on 16 bits.
It will work wit new and old versions of mpg123.
Thanks Thomas Orgis <thomas-forum@orgis.org> for giving the key!
ASTERISK-29635 #close
Change-Id: I88c7740118b5af4e895bd8b765b68ed5c11fc816
Adds parsing of ANI II digits (Originating
Line Information) to PJSIP, on par with
what currently exists in chan_sip.
ASTERISK-29472
Change-Id: Ifc938a7a7d45ce33999ebf3656a542226f6d3847
Adds a SendMF application and PlayMF manager
event to send arbitrary R1 MF tones on the
current or specified channel.
ASTERISK-29496
Change-Id: I5d89afdbccee3f86cc702ed96d882f3d351327a4
Previously, the error emitted when app_stack tries
to branch to a dialplan location that doesn't exist
has included only the information about the attempted
branch in the error log. This adds the current location
as well so users can see where the branch failed in
the logs.
ASTERISK-29626
Change-Id: Ia23502ab2ad21485a1ac74295063a8f25a6df5ce
Adds the STRBETWEEN function, which can be used to insert a
substring between each character in a string. For instance,
this can be used to insert pauses between DTMF tones in a
string of digits.
ASTERISK-29627
Change-Id: Ice23009d4a8e9bb9718d2b2301d405567087d258
We can't rely on RAII_VAR(...) to properly clean up data that is
allocated within a loop.
ASTERISK-27176 #close
Change-Id: Ib575616101230c4f603519114ec62ebf3936882c
Adds the DIRNAME and BASENAME functions, which are
wrappers around the corresponding C library functions.
These can be used to safely and conveniently work with
file paths and names in the dialplan.
ASTERISK-29628 #close
Change-Id: Id3aeb907f65c0ff96b6e57751ff0cb49d61db7f3
Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.
This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.
Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.
ASTERISK-29531
Change-Id: If9718c89353b8e153d84add3cc4637b79585db19
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
With gcc 11, res/res_snmp.c and res/snmp/agent.c need the
-fPIC option added to its _ASTCFLAGS.
ASTERISK-29634
Change-Id: I34649c85e075fd954e578378fabf798c3f038f50
There is an option to silence voicemail instructions but it does not
take into consideration if a recorded greeting exists or not. Add a
new 'S' option that does that.
ASTERISK-29632 #close
Change-Id: I03f2f043a9beb9d99deab302247e2a8686066fb4
ncurses 6.1 introduced an extended number format for terminfo files
which the terminfo parsing in Asterisk is not able to parse. This
results in some TERM values that do support color (screen-256color on
Ubuntu 20.04 for example) to not get a color console.
ASTERISK-29630 #close
Change-Id: I27a4fcfab502219924af2d6b1c46feba92903cb3
When compiled without extended srtp crypto suites also disable parsing
these from received SDP. This prevents using these, as some client
implementations are not stable.
ASTERISK-29625
Change-Id: I7dafb29be1cdaabdc984002573f4bea87520533a
IPv6 nameserver addresses are stored in different part of the
__res_state structure, so look there if we appear to have support for
it.
ASTERISK-28004 #close
Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d
There are conditions under which a failure to change topology
is expected so there's no need to print an ERROR message.
ASTERISK-29618
Reported by: Alexander
Change-Id: Idc168b8588e018bf3a23769f08c4ad646086d481
There are 3 separate changes here but they are all closely related:
* Only try to set matchfield attributes on 'field' nodes
* We need to adjust how we treat the category pointer based on the
value of the category_match, to avoid memory corruption. We now
generate a regex-like string when match types other than
ACO_WHITELIST and ACO_BLACKLIST are used.
* Switch app_agent_pool from ACO_BLACKLIST_ARRAY to
ACO_BLACKLIST_EXACT since we only have one category we need to
ignore, not two.
ASTERISK-29614 #close
Change-Id: I7be7bdb1bb9814f942bc6bb4fdd0a55a7b7efe1e
Adds an information element for ANI2 so that
Originating Line Information can be transmitted
over IAX2 channels.
ASTERISK-29605 #close
Change-Id: Iaeacdf6ccde18eaff7f776a0f49fee87dcb549d2
Currently pbx_ael does not check if a reload is currently pending
before proceeding with a reload. This can cause multiple threads to
operate at the same time on what should be mutex protected data. This
change adds protection to reloading to ensure only one ael reload is
executing at a time.
ASTERISK-29609 #close
Change-Id: I5ed392ad226f6e4e7696ad742076d3e45c57af35
Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.
ASTERISK-18454 #close
Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b
This allows the STUN server to change its IP address without having to
reload the res_rtp_asterisk module.
The refresh of the name resolution occurs first when the module is
loaded, then recurringly, slightly after the previous DNS answer TTL
expires.
ASTERISK-29508 #close
Change-Id: I7955a046293f913ba121bbd82153b04439e3465f
The attended transfer feature will emit a warning if the user
cancels the transfer or the attended transfer doesn't complete
for any reason. Changes the warning to a verbose message,
since nothing is actually wrong here.
ASTERISK-29612 #close
Change-Id: I64c93cdb21360a0a8d45e9cb6db3af8168f66e6d
Prevents reloads of app_queue from also resetting
queue statistics.
Also preserves individual queue agent statistics
if we're just reloading members.
ASTERISK-28701
Change-Id: Ib5d4cdec175e44de38ef0f6ede4a7701751766f1
This changeset is intended to address compatibility issues encountered
when interfacing Asterisk to electromechanical telephone switches that
implement ANI-B, ANI-C, or ANI-D.
In particular the behaviours that this impacts include:
- FGC-CAMA did not work at all when using MF signaling. Modified the
switch case block to send calls to the correct part of the
signaling-handling state machine.
- For FGC-CAMA operation, the delay between called number ST and
second wink for ANI spill has been made configurable; previously
all calls were made to wait for one full second.
- After the ANI spill, previous behavior was to require a 'ST' tone
to advance the call. This has been changed to allow 'STP' 'ST2P'
or 'ST3P' as well, for compatibility with ANI-D.
- Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable.
- For calls with an ANI failure, No. 1 Crossbar switches will send
forward a single-digit failure code, with no calling number digits
and no ST pulse to terminate the spill. I've made the ANI timeout
configurable so to reduce dead air time on calls with ANI fail.
- ANI info digits configurable. Modern digital switches will send 2
digits, but ANI-B sends only a single info digit. This caused the
ANI reported by Asterisk to be misaligned.
- Changed a confusing log message to be more informative.
ASTERISK-29518
Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256
When playing a remote sound file, which is not in cache, first we need
to download it with ast_bucket_file_retrieve.
This can take a while if the remote host is slow. The current CURL
timeout is 180secs, so in extreme situations, it can take 3 minutes to
return.
Because ast_media_cache_retrieve has a lock on all function, while we
are waiting for the delayed download, Asterisk is not able to play any
more files, even the files already cached locally.
ASTERISK-29544 #close
Change-Id: I8d4142b463ae4a1d4c41bff2bf63324821567408
Allow mapping pjproject log messages to the Asterisk TRACE
log level. The defaults were also changes to log pjproject
levels 3,4 to DEBUG and 5,6 to TRACE. Previously 3,4,5,6
all went to DEBUG.
ASTERISK-29582
Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d
The Milliwatt application uses incorrect tone timings
that cause it to play the 1004 Hz tone constantly.
This adds an option to enable the correct timing
behavior, so that the Milliwatt application can
be used for milliwatt test lines. The default behavior
remains unchanged for compatability reasons, even
though it is incorrect.
ASTERISK-29575 #close
Change-Id: I73ccc6c6fcaa31931c6fff3b85ad1805b2ce9d8c
The MIN, MAX, and ABS functions all support float
arguments, but currently return floats even if the
arguments are all integers and the response is
a whole number, in which case the user is likely
expecting an integer. This casts the float to an integer
before printing into the response buffer if possible.
ASTERISK-29495
Change-Id: I902d29eacf3ecd0f8a6a5e433c97f0421d205488
Previously, the Morsecode application only supported international
Morse code. This adds support for American Morse code and adds an
option to configure the frequency used in off intervals.
Additionally, the application checks for hangup between tones
to prevent application execution from continuing after hangup.
ASTERISK-29541
Change-Id: I172431a2e18e6527d577e74adfb05b154cba7bd4
Adds a function to scramble audio on a channel using
whole spectrum frequency inversion. This can be used
as a privacy enhancement with applications like
ChanSpy or other potentially sensitive audio.
ASTERISK-29542
Change-Id: I01020769d91060a1f56a708eb405f87648d1a67e
A list of codecs to use for dialplan-originated calls can
now be specified in Originate, similar to the ability
in call files and the manager action.
Additionally, we now default to just using the slin codec
for originated calls, rather than all the slin* codecs up
through slin192, which has been known to cause issues
and inconsistencies from AMI and call file behavior.
ASTERISK-29543
Change-Id: I96a1aeb83d54b635b7a51e1b4680f03791622883
Commit 305ce3d added -Wno-parentheses-equality to Makefile.rules,
turning the previous two warning suppressions from commit e9520db
redundant. Let us remove the latter.
Change-Id: I0b471254b31e6e05902062761dded4b3e626c7ac
app_meetme is deprecated in 19, to be removed in 21.
app_osplookup is deprecated in 19, to be removed in 21.
chan_alsa is deprecated in 19, to be removed in 21.
chan_mgcp is deprecated in 19, to be removed in 21.
chan_skinny is deprecated in 19, to be removed in 21.
res_pktccops is deprecated in 19, to be removed in 21.
app_macro was deprecated in 16, to be removed in 21.
chan_sip was deprecated in 17, to be removed in 21.
res_monitor was deprecated in 16, to be removed in 21.
ASTERISK-29548
ASTERISK-29549
ASTERISK-29550
ASTERISK-29551
ASTERISK-29552
ASTERISK-29553
ASTERISK-29558
ASTERISK-29567
ASTERISK-29572
Change-Id: Ic3bee31a10d42c4b3bbc913d893f7b2a28a27131
Adds function to selectively drop specified frames
in the TX or RX direction on a channel, including
control frames.
ASTERISK-29478
Change-Id: I8147c9d55d74e2e48861edba6b22f930920541ec
With Asterisk 1.6.0, in the main parser for the configuration file
extensions.conf, the separator was changed from vertical bar to comma.
However, the first separator was not changed in aelparse; it still had
to be a vertical bar, and no comma was allowed.
Additionally, this change allows the vertical bar for the first and
last parameter again, even in the main parser, because the vertical bar
was still accepted for the other parameters.
ASTERISK-29540
Change-Id: I882e17c73adf4bf2f20f9046390860d04a9f8d81
This format did not specify a "write" handler, so when attempting to write
to it (ast_writestream) a crash would occur.
This patch adds a default handler that simply issues a "not supported"
warning, thus no longer crashing.
ASTERISK-29539
Change-Id: I8f6ddc7cc3b15da30803be3b1cf68e2ba0fbce91
Previously, if CDR filters were used so that
not all CDR records used all sections defined
in cdr_adaptive_odbc.conf, then warnings will
always be emitted (if each CDR record is unique
to a particular section, n-1 warnings to be
specific).
This turns the offending warning log into
a verbose message like the other one, since
this behavior is intentional and not
indicative of anything wrong.
ASTERISK-29494
Change-Id: Ifd314fa9298722bc99494d5ca2658a5caa94a5f8
Allows multiple files comprising an agent announcement
to be played by separating on the ampersand, similar
to the multi-file support in other Asterisk applications.
ASTERISK-29528
Change-Id: Iec600d8cd5ba14aa1e4e37f906accb356cd7891a
PJSIP currently does not provide a function to replace SIP_HEADERS() function to get a list of headers from INVITE request.
It may be used to get all X- headers in case the actual set and names of headers unknown.
ASTERISK-29389
Change-Id: Ic09d395de71a0021e0d6c5c29e1e19d689079f8b
Meter types are not well supported,
lacking support in telegraf, datadog and the official statsd servers.
We deprecate meters and provide a compliant fallback for any existing usages.
A flag has been introduced to allow meters to fallback to counters.
ASTERISK-29513
Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7
Adds application to asynchronously collect digits
dialed on a channel in the TX or RX direction
using a framehook and stores them in a specified
variable, up to a configurable number of digits.
ASTERISK-29477
Change-Id: I51aa93fc9507f7636ac44806c4420ce690423e6f
If Asterisk gets G.729 6-byte VAD frames inbound, then at outbound Asterisk sends this G.729 stream with non-continuous timestamps.
This makes the audio stream not-playable at the receiver side.
Linphone isn't able to play such an audio - lots of disruptions are heard.
Also I had complains of bad audio from users which use other types of phones.
After debugging, I found this is a regression connected with RTP Smoother (main/smoother.c).
Smoother has a special code to handle G.729 VAD frames (search for AST_SMOOTHER_FLAG_G729 in smoother.c).
However, this flag is never set in Asterisk-12 and newer.
Previously it has been set (see Asterisk-11).
ASTERISK-29526 #close
Change-Id: I6f51ecb1a3ecd9c6d59ec5a6811a27446e17065d
Asterisk first looks at the end of the URL to determine the file
extension of the returned audio, which in many cases will not work
because the URL may end with a query string or a URL fragment. If that
fails, Asterisk then looks at the Content-Type header and then finally
parses the URL to get the extension.
The order has been changed such that we look at the Content-Type
header first, followed by looking for the extension of the parsed
URL. We no longer look at the end of the URL, which was error prone.
ASTERISK-29527 #close
Change-Id: I1e3f83b339ef2b80661704717c23568536511032
If an SSL socket parent/listener was destroyed during the handshake,
depending on timing, it was possible for the handling callback to
attempt access of it after the fact thus causing a crash.
ASTERISK-29415 #close
Change-Id: I105dacdcd130ea7fdd4cf2010ccf35b5eaf1432d
If chan_iax2 received a packet with an unsupported media format, for
example vp9, then it would set the frame's format to NULL. This could
then result in a crash later when an attempt was made to access the
format.
This patch makes it so chan_iax2 now ignores/drops frames received
with unsupported media format types.
ASTERISK-29392 #close
Change-Id: Ifa869a90dafe33eed8fd9463574fe6f1c0ad3eb1
If a re-INVITE is received after we have sent a BYE request then it
is possible for no channel to be present on the session. If this
occurs we allow PJSIP to produce the offer instead. Since the call
is being hung up if it produces an incorrect offer it doesn't
actually matter. This also ensures that code which produces SDP
does not need to handle if a channel is not present.
ASTERISK-29381
Change-Id: I673cb88c432f38f69b2e0851d55cc57a62236042
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><htmlxmlns="http://www.w3.org/1999/xhtml"><title>Release Summary - asterisk-19.7.1</title><h1align="center"><aname="top">Release Summary</a></h1><h3align="center">asterisk-19.7.1</h3><h3align="center">Date: 2022-12-01</h3><h3align="center"><asteriskteam@digium.com></h3><hr><h2align="center">Table of Contents</h2><ol>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><htmlxmlns="http://www.w3.org/1999/xhtml"><title>Release Summary - asterisk-20.0.1</title><h1align="center"><aname="top">Release Summary</a></h1><h3align="center">asterisk-20.0.1</h3><h3align="center">Date: 2022-12-01</h3><h3align="center"><asteriskteam@digium.com></h3><hr><h2align="center">Table of Contents</h2><ol>
</ol><hr><aname="summary"><h2align="center">Summary</h2></a><center><ahref="#top">[Back to Top]</a></center><p>This release has been made to address one or more security vulnerabilities that have been identified. A security advisory document has been published for each vulnerability that includes additional information. Users of versions of Asterisk that are affected are strongly encouraged to review the advisories and determine what action they should take to protect their systems from these issues.</p><p>Security Advisories:</p><ul>
</ul><p>The data in this summary reflects changes that have been made since the previous release, asterisk-19.7.0.</p><hr><aname="contributors"><h2align="center">Contributors</h2></a><center><ahref="#top">[Back to Top]</a></center><p>This table lists the people who have submitted code, those that have tested patches, as well as those that reported issues on the issue tracker that were resolved in this release. For coders, the number is how many of their patches (of any size) were committed into this release. For testers, the number is the number of times their name was listed as assisting with testing a patch. Finally, for reporters, the number is the number of issues that they reported that were affected by commits that went into this release.</p><tablewidth="100%"border="0">
</ul><p>The data in this summary reflects changes that have been made since the previous release, asterisk-20.0.0.</p><hr><aname="contributors"><h2align="center">Contributors</h2></a><center><ahref="#top">[Back to Top]</a></center><p>This table lists the people who have submitted code, those that have tested patches, as well as those that reported issues on the issue tracker that were resolved in this release. For coders, the number is how many of their patches (of any size) were committed into this release. For testers, the number is the number of times their name was listed as assisting with testing a patch. Finally, for reporters, the number is the number of issues that they reported that were affected by commits that went into this release.</p><tablewidth="100%"border="0">
<trvalign="top"><tdwidth="33%">2 Asterisk Development Team <asteriskteam@digium.com><br/>2 Mike Bradeen <mbradeen@sangoma.com><br/>1 George Joseph <gjoseph@digium.com><br/>1 Ben Ford <bford@digium.com><br/></td><tdwidth="33%"><tdwidth="33%">1 shawty <shawty.d.ds@googlemail.com><br/>1 nappsoft <infos@nappsoft.ch><br/>1 Benjamin Keith Ford <bford@digium.com><br/>1 Michael Bradeen <mbradeen@sangoma.com><br/></td></tr>
<trvalign="top"><tdwidth="33%">2 Mike Bradeen <mbradeen@sangoma.com><br/>1 Asterisk Development Team <asteriskteam@digium.com><br/>1 George Joseph <gjoseph@digium.com><br/>1 Ben Ford <bford@digium.com><br/></td><tdwidth="33%"><tdwidth="33%">1 shawty <shawty.d.ds@googlemail.com><br/>1 nappsoft <infos@nappsoft.ch><br/>1 Benjamin Keith Ford <bford@digium.com><br/>1 Michael Bradeen <mbradeen@sangoma.com><br/></td></tr>
</table><hr><aname="closed_issues"><h2align="center">Closed Issues</h2></a><center><ahref="#top">[Back to Top]</a></center><p>This is a list of all issues from the issue tracker that were closed by changes that went into this release.</p><h3>Security</h3><h4>Category: Addons/chan_ooh323</h4><ahref="https://issues.asterisk.org/jira/browse/ASTERISK-30103">ASTERISK-30103</a>: chan_ooh323 Vulnerability in calling/called party IE<br/>Reported by: Michael Bradeen<ul>
<li><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=c4dfc1c7293039a2d99ddbe30e00769a0917f89d">[c4dfc1c729]</a> Mike Bradeen -- ooh323c: not checking for IE minimum length</li>
<li><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=d420314ffdba7cb143b98a8cc501719e915dc4f7">[d420314ffd]</a> Mike Bradeen -- ooh323c: not checking for IE minimum length</li>
</ul><br><h4>Category: Core/ManagerInterface</h4><ahref="https://issues.asterisk.org/jira/browse/ASTERISK-30176">ASTERISK-30176</a>: manager: GetConfig can read files outside of Asterisk<br/>Reported by: shawty<ul>
<li><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=3c15d0912a5b6de1f974d1c32d1d5b9916621795">[3c15d0912a]</a> Mike Bradeen -- manager: prevent file access outside of config dir</li>
<li><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=0f44cd885a3723774f63a25048057a8bd7acd94b">[0f44cd885a]</a> Mike Bradeen -- manager: prevent file access outside of config dir</li>
</ul><br><h4>Category: pjproject/pjsip</h4><ahref="https://issues.asterisk.org/jira/browse/ASTERISK-30338">ASTERISK-30338</a>: pjproject: Backport security fixes from 2.13<br/>Reported by: Benjamin Keith Ford<ul>
<li><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=fc5efc933ecf37a15d73b8c008334f7d2a323f56">[fc5efc933e]</a> Ben Ford -- pjproject: 2.13 security fixes</li>
<li><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=702f400e3e2ae2e301d3399906e246487b2f517f">[702f400e3e]</a> Ben Ford -- pjproject: 2.13 security fixes</li>
</ul><br><h3>Bug</h3><h4>Category: Resources/res_pjsip_pubsub</h4><ahref="https://issues.asterisk.org/jira/browse/ASTERISK-30244">ASTERISK-30244</a>: res_pjsip_pubsub: Occasional crash when TCP/TLS connection terminated and subscription persistence is removed<br/>Reported by: nappsoft<ul>
<li><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=583fdafd228530440385c71ae225d6a0451b14ee">[583fdafd22]</a> George Joseph -- pjsip_transport_events: Fix possible use after free on transport</li>
<li><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=ed45a9182d17b27fb78546da4ef392210f19464c">[ed45a9182d]</a> George Joseph -- pjsip_transport_events: Fix possible use after free on transport</li>
</ul><br><hr><aname="commits"><h2align="center">Commits Not Associated with an Issue</h2></a><center><ahref="#top">[Back to Top]</a></center><p>This is a list of all changes that went into this release that did not reference a JIRA issue.</p><tablewidth="100%"border="1">
<tr><td><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=75a01e8a8f9a2b1a67216ab7325dc914098f82e9">75a01e8a8f</a></td><td>Asterisk Development Team</td><td>Update CHANGES and UPGRADE.txt for 19.7.1</td></tr>
<tr><td><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=44df664fe02569fa7ee1b7c0dadad20ccf97c18d">44df664fe0</a></td><td>Asterisk Development Team</td><td>Update for 19.7.1</td></tr>
<tr><td><ahref="https://code.asterisk.org/code/changelog/asterisk?cs=cdc655b2a6804aedc279d5fd0a5e2317a3c146a9">cdc655b2a6</a></td><td>Asterisk Development Team</td><td>Update CHANGES and UPGRADE.txt for 20.0.1</td></tr>
</table><hr><aname="diffstat"><h2align="center">Diffstat Results</h2></a><center><ahref="#top">[Back to Top]</a></center><p>This is a summary of the changes to the source code that went into this release that was generated using the diffstat utility.</p><pre>UPGRADE.txt | 13
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
